[solved]dvs7 no sound searching in a track with the vinyl

[AceTech]

Hi,

When I try to find a point uitable for slip cueing, i experience the following problem: If I place my needle on the record (not in the beginning of the vinyl) and I want to rewind it manually by spinning it counterclockwise with my hand, i get no sound during the actual action , which makes it very hard to find a good cueing point. I know you can do it digitally, but I'm used to mixing with vinyl only so is there any solutuion to this problem?

Thank you!

[polocorp]

hi, what mode are you spinning in ? absolute ?

how do you experience the problem ? do you momentarily loose sound during the spin back ? If so this si because you are back spinning to fast for the software to decode your timecode... try spinning a little slower. This problem accures with all DVS systems if you make a drastic spin.

[UncleVibes]

If so this si because you are back spinning to fast for the software to decode your timecode... try spinning a little slower. This problem accures with all DVS systems if you make a drastic spin.

No, there is something wrong with your setup. Can you post a config report extracted from mixvibes with your turntable at 0 pitch.
Also send details about your computer.
You shouldn't have this problem while spinning with DVS.
Fast spin is common to all scratchers.

[AceTech]

If so this si because you are back spinning to fast for the software to decode your timecode... try spinning a little slower. This problem accures with all DVS systems if you make a drastic spin.

No, there is something wrong with your setup. Can you post a config report extracted from mixvibes with your turntable at 0 pitch.
Also send details about your computer.
You shouldn't have this problem while spinning with DVS.
Fast spin is common to all scratchers.

will do that as soon as possible thanks in advance

[AceTech]

Config 2009/09/16 11:32

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=0 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=No
Display Pitch=Yes Auto Match at load=No
Bpm Range min=120 max=250
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=47 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-U46DJ 1 2-U46DJ 2
3-U46DJ 3 4-U46DJ 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U46DJ 1-U46DJ 2
Mode=absolute
Riaa=No Preamp Left=5 db Preamp Right=6 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.556 Volume max right=0.556 Volume optimum=0.370
Speed Average(100ms)=1.003 Speed Average(1s)=1.001 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U46DJ 3-U46DJ 4
Mode=absolute
Riaa=Yes Preamp Left=2 db Preamp Right=2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.594 Volume max left=0.514 Volume max right=0.514 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000

[N-deep]

Latency=47

This latency is way too big! Can you try to change it to 12?

[UncleVibes]

or between 3 to 6 ms (128 / 256 samples) see the audio panel of your sound card.

[AceTech]

it's solved... apparently "the load in memory" time was set to 0 minutes must have missclicked something there