Headphone monitoring

[finbar2014]

Hi again, have put licence in and downloaded v2.6.0. Got it on dual stereo. Still getting my cue channel coming out as the same time as master ?

[daniel clark]

need to see you audio panel in Cross DJ le ,, ,,
also check that there is not a physical control on the controller that is in mix and cue ,, also check the software interface (gui) has a control for mix cue ,that its in cue postion

[finbar2014]

Sorry getting the hang of the forum now, still having monitoring issues though, have a look still cant get the settings right.. Cheers

ss.jpg

[daniel clark]

in the Cross gui the upper right hand side the knob in the center ,you have it in master and cue ,, if turned counter clock wise what do you get (the knob is labelel mix ,,, ,,also the chnnel two is sellected digital ,,

[daniel clark]

wjhen we get this sorted then you get confortable with the software then update to latest version ,,

[finbar2014]

With 'mix turned down the active channel is sounding through the speakers and the headphones (not highlighted to cue & plugged into the soundcard). No cue through the headphones for the inactive channel.
On the soundcard settings if output 1 is analogue then output 2 displays as digital and vice versa...

[daniel clark]

With 'mix turned down the active channel is sounding through the speakers and the headphones (not highlighted to cue & plugged into the soundcard). No cue through the headphones for the inactive channel.
On the soundcard settings if output 1 is analogue then output 2 displays as digital and vice versa...

With mix turned down,,,,,meaning the mix/cue kmob on gui is in the full cue postion(coynter clockwise),, the knob is there to pan between mix(master out)and cue,, if that happening then that fine ,,

if you look at the Cross audio panel ,, the wiring diagram repersents the outputs that the s c are using ,, meaning that output if selected for master then that what being used ,, and out put 2 for cue ,, the selection of what sc out put goes where is up to you to select
,, not shure why you have a digital out put selected ,,
does the analog output play the master ,,

[finbar2014]

The 'mix' knob seems inactive, I hear the master out of the sound card headphone jack and the analogue output.
Output 1 set as analogue is working as Master. Output 2 set as digital is default in this case. If I change output 1 to digital output 2 flips to analogue. Perhaps this is a limitation of the soundcard, if i could set output 2 to the headphone jack that would be perfect ..but the option isn't there

[daniel clark]

are thoese the only selections that Cross see ,,thinking the sc only has two out ,, looked in the spec of the link i posted for the sc ,,might be so .

[finbar2014]

Yes, the only way around i can see is a digital to analogue converter and run that from digital output 2 of my SC into the session channel of my Vestax 08pro. The Vestax can toggle between cue channels.
The item I bought is only a budget controller but I am happy with the functionality of the software so far