by sfronti on 28 Nov 2017, 16:05
Here is the map with the functions you asked for. Stelios, Greece G4V (Gemini)(GEMINI).mappings
You do not have the required permissions to view the files attached to this post. July 2012 Mixvibes DJ of the Month Hp EliteBookC.P.U: Intel Core I7, 2.0GHz Ram:16Gb V.G.A:NVIDIA Quadro 3000M (2Gb ram) H.D.D1:SSD 500Gb H.D.D2:SSD 1TB Soundcard: Esi UDJ6, Audio4 DJ O.S:Win 10 Pro 64bit, Win 7 Pro 64bit Mix Vibes: Cross 3.4.3, 3.3.11 Controller:Gemini G4V, U-Mix Pro2, Denon MC3000, Faderfox Dj2, MEMBER OF: c00l People MV Society
-
sfronti
-
- Posts: 923
- Joined: 17 May 2007, 11:16
- Location: Athens, Greece
by FigDJ on 28 Nov 2017, 18:08
sfronti wrote:Here is the map with the functions you asked for. Stelios, Greece G4V (Gemini)(GEMINI).mappings
Ok a little bit of miscommunication on my part here. As I was able to verify player 1 is using MIDI channel 1 and player 2 is using MIDI channel 2. That is confirmed by documentation and the map. I suspect that the Deck C/A and Deck B/C buttons are hardware buttons as well as MIDI. By documentation and your map I confirmed that Deck C/A button uses parameter 26 on channel 1 and the Deck B/D button uses parameter 26 on channel 2. The hardware portion is what I need to confirm. I don't need you to map the Deck switch buttons. I just need to use them without any MIDI commands to see if they switch the hardware channels. Without mapping the deck switch buttons, press the deck switch buttons on each side. then map the play buttons for players 3 on the left and 4 on the right. That would tell me if the MIDI channel changed. If the channel changed, I can then use those channels to map players 3 and 4. If the channels did not changed, then I have to use modshiftlogic in toggle mode to switch decks. Determining if I have to use toggle mode is important because it affect how the LEDs should be mapped.
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
by sfronti on 29 Nov 2017, 12:15
Good evening Here's the MIDI file you asked for. I kept pushed the deck change button and then pushed the play button for player 3 and the same way for player 4. Thanks a lot G4V (Gemini)(GEMINI).mappings Stelios, Greece
You do not have the required permissions to view the files attached to this post. July 2012 Mixvibes DJ of the Month Hp EliteBookC.P.U: Intel Core I7, 2.0GHz Ram:16Gb V.G.A:NVIDIA Quadro 3000M (2Gb ram) H.D.D1:SSD 500Gb H.D.D2:SSD 1TB Soundcard: Esi UDJ6, Audio4 DJ O.S:Win 10 Pro 64bit, Win 7 Pro 64bit Mix Vibes: Cross 3.4.3, 3.3.11 Controller:Gemini G4V, U-Mix Pro2, Denon MC3000, Faderfox Dj2, MEMBER OF: c00l People MV Society
-
sfronti
-
- Posts: 923
- Joined: 17 May 2007, 11:16
- Location: Athens, Greece
by FigDJ on 29 Nov 2017, 15:56
sfronti wrote:Good evening Here's the MIDI file you asked for. I kept pushed the deck change button and then pushed the play button for player 3 and the same way for player 4. Thanks a lot G4V (Gemini)(GEMINI).mappings Stelios, Greece
So you kept the deck change button pressed and while pressed you mapped the play button? You must change the deck, press and release the deck change button, then map the paly button. So far from what you send me I don't see a channel change. One more try. I know it is difficult to communicate this way but it is the only option. Once I get started things wil go smother and faster.
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
by sfronti on 29 Nov 2017, 17:24
"So you kept the deck change button pressed and while pressed you mapped the play button?"
-Yes
"You must change the deck, press and release the deck change button, then map the paly button." - Ok no problem. I'll do it as soon as i'll get back home.
From what i saw while pressing buttons in Cross player 1 and 2 use the same MIDI channel but the note (is it correct?) is different. This is happening with player 3,4 too. Sorry if this is something that has nothing to do with our job.
Thanks a lot for your precious time.
July 2012 Mixvibes DJ of the Month Hp EliteBookC.P.U: Intel Core I7, 2.0GHz Ram:16Gb V.G.A:NVIDIA Quadro 3000M (2Gb ram) H.D.D1:SSD 500Gb H.D.D2:SSD 1TB Soundcard: Esi UDJ6, Audio4 DJ O.S:Win 10 Pro 64bit, Win 7 Pro 64bit Mix Vibes: Cross 3.4.3, 3.3.11 Controller:Gemini G4V, U-Mix Pro2, Denon MC3000, Faderfox Dj2, MEMBER OF: c00l People MV Society
-
sfronti
-
- Posts: 923
- Joined: 17 May 2007, 11:16
- Location: Athens, Greece
by sfronti on 29 Nov 2017, 20:50
What i wrote above is totally wrong about play/pause MIDI channels in deck a and b.
Correction:
Deck A Play/Pause: Channel 1 - Note 0x1 Deck B Play/Pause: Channel 2 - Note 0x1
Stelios, Greece
July 2012 Mixvibes DJ of the Month Hp EliteBookC.P.U: Intel Core I7, 2.0GHz Ram:16Gb V.G.A:NVIDIA Quadro 3000M (2Gb ram) H.D.D1:SSD 500Gb H.D.D2:SSD 1TB Soundcard: Esi UDJ6, Audio4 DJ O.S:Win 10 Pro 64bit, Win 7 Pro 64bit Mix Vibes: Cross 3.4.3, 3.3.11 Controller:Gemini G4V, U-Mix Pro2, Denon MC3000, Faderfox Dj2, MEMBER OF: c00l People MV Society
-
sfronti
-
- Posts: 923
- Joined: 17 May 2007, 11:16
- Location: Athens, Greece
by sfronti on 29 Nov 2017, 21:02
sfronti wrote: You must change the deck, press and release the deck change button, then map the paly button."
When i release the deck change button and trying to map deck c play/pause informs to re-assign the button 'cause it is used by deck a play/pause. Stelios, Greece
July 2012 Mixvibes DJ of the Month Hp EliteBookC.P.U: Intel Core I7, 2.0GHz Ram:16Gb V.G.A:NVIDIA Quadro 3000M (2Gb ram) H.D.D1:SSD 500Gb H.D.D2:SSD 1TB Soundcard: Esi UDJ6, Audio4 DJ O.S:Win 10 Pro 64bit, Win 7 Pro 64bit Mix Vibes: Cross 3.4.3, 3.3.11 Controller:Gemini G4V, U-Mix Pro2, Denon MC3000, Faderfox Dj2, MEMBER OF: c00l People MV Society
-
sfronti
-
- Posts: 923
- Joined: 17 May 2007, 11:16
- Location: Athens, Greece
by sfronti on 29 Nov 2017, 21:34
I've just received this from Gemini. I think it's the same with the one we already have. Stelios, Greece g4v g2v MIDI hid table(08.29.13).xls
You do not have the required permissions to view the files attached to this post. July 2012 Mixvibes DJ of the Month Hp EliteBookC.P.U: Intel Core I7, 2.0GHz Ram:16Gb V.G.A:NVIDIA Quadro 3000M (2Gb ram) H.D.D1:SSD 500Gb H.D.D2:SSD 1TB Soundcard: Esi UDJ6, Audio4 DJ O.S:Win 10 Pro 64bit, Win 7 Pro 64bit Mix Vibes: Cross 3.4.3, 3.3.11 Controller:Gemini G4V, U-Mix Pro2, Denon MC3000, Faderfox Dj2, MEMBER OF: c00l People MV Society
-
sfronti
-
- Posts: 923
- Joined: 17 May 2007, 11:16
- Location: Athens, Greece
Return to Mapping Midi
Users browsing this forum: No registered users and 23 guests
|
|
|