Time code vinyl issues

[Robbie_92]

Hi guys, so here is the story.. i purchased mixvibes DVS Ultimate second hand on ebay. I couldnt get the software to work as way out date. So just upgraded to Cross. I istalled it and set up it up. My sound card is U-Mix44 and i have ny Pioneer plx500s plugged in. My external mixer is Numark m4. I am having issues with my time code vinyl and starting to think i have the wrong ones. Altho they are mixvibe they also say track selection on them. When i put the needle on the last section of the turntable its scolls down through the tracks. When i manually select a song and put need on track it doesnt play. Calabration says 100% tho? I am new to this

[daniel clark]

Little bit more info
is there a t c signal on the flip side of record
have you looked in manual for more info ,,still applies to the tc set up ,,dont use it myself ,,just trying to point you in the right direction

[Robbie_92]

Daniel i have no idea i am a complete novie to this kind of set up. Is there anyway i can send you photos?

[Robbie_92]

I am able to use the track selection part of the vinyl and it scross down the tracks. But when i put beedle to start of vinyl is soesnt do anything. It doesnt control the track at all. Its reall frustrating me now. Strange that it lests me scroll but wont let me control a track. I can manually hit play and sound will xome through my mixer. I.e if a load a track on deck A it will come through channel 1 on my mixer. Just the control vinyl doesnt do its job.

[daniel clark]

in Cross software the upper left icon in the header is display /menue ...go to help tab and select manual .. read or info as to set up and use of tc ,, time to become a expert

[jaymarkus]

I Think that you didn`t enable Vinylmodus.

Hoover over the Waveforms with your mouse than there appear

1/2 and an Arrow
click 1 for the left side
click on the other waveform on 2 for the right side.

than there are various modes

Absolut Modus (put the needle on the record and song at the same position)
Relative Modus (If you are using loops or Cue points without )
Internal Modus Internal player (Turntable has no effect at this )

[Robbie_92]

Jaymarkus do i do this o the calibration section? Or on the main interface?

[RoJeC]

usevinyl.png

[Robbie_92]

How do i try the 32bit version? Complete new to this software guys.

[RoJeC]

If you have a 64bit OS both versions (32 and 64bit) are installed by the same installer. 64bit is called 64bit... the other is 32bit.

Cross 64bit is a rewritten version so it is true 64bit. For this it has been decided that it will only be working when you (are able to) use audio and video support of full 64bit drivers.

In future versions this opens new options to use more heavy duty features, e.g. more complex FX's and still have the Cross program respond with less than 1ms delay.