Discuss technical issues with the community. Mixvibes staff provides no support on this board.
by antoniogr on 08 Aug 2016, 18:16
Hi, I have a sirus pro x-con micro DJ MIDI controller and I can't get it to work with mixvibes. It came with the mixvibes cd installation and cd key which worked, but when I connect the MIDI controller it just flashes the buttons lights and I get no response from it anymore. All drivers were installed with no errors and my laptop recognizes when I connect and disconnect the usb. Also tried virtual DJ but it also didnt work. I think the problem is in the controller because it can only flash the lights for less than half a second and after that it's not working. Can anyone help me out?
-
antoniogr

-
- Posts: 5
- Joined: 08 Aug 2016, 01:38
by daniel clark on 08 Aug 2016, 23:51
 thats not a good thing ,,try to help best i can ,, need info,, software and version ,, also in the grey header are instructions as to how to regerster the software in the fourm then may be a link for the controller ,,to find out info about it and what mappings are avaible ,, then info on your computer set up ,,got to know what os and version for any issues there .. 
  January 2012 Mixvibes DJ of the month MEMBER OF:  C00l People MV Society  2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-

daniel clark


-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
by antoniogr on 09 Aug 2016, 01:25
First of all thanks for helping out. The CD came with Cross DJ LE 1.6.0. https://bkbraun.com/en/AUDIO/DJ-Equipme ... Micro.htmlIt has been discontinued but i bought it used and it doesn't look damaged. I have windows 7 Home Premium Service Pack 1. I thought it could be because the usb isnt providing enough power, but i have a focusrite scarlett 2i2 that works just fine with usb so maybe that's not the issue. Also tried with both usb 2.0 and 3.0.
-
antoniogr

-
- Posts: 5
- Joined: 08 Aug 2016, 01:38
by daniel clark on 09 Aug 2016, 02:02
 good i see that you have regerstered the software ,,by chance have you looked in download section if there is a update for your version/bundel ,if not then do so ,,if no update ,, give me a chance to look over the controller have you look in the MIDI tab .. for any map avaible while in MIDI tab with the controller pluged in ,,is it seeing the controller and is a green on line icon on 
  January 2012 Mixvibes DJ of the month MEMBER OF:  C00l People MV Society  2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-

daniel clark


-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
by antoniogr on 09 Aug 2016, 02:56
The controller appears on windows as MIDI 8 and I need to have it plugged in, in order to start Cross DJ so it kinda is being recognized. What do you mean by MIDI tab? All I have is a tab that says "Keyboard" and it has what i suppose is a list of controllers the program recognized, and it only has my laptop keyboard in it.
-
antoniogr

-
- Posts: 5
- Joined: 08 Aug 2016, 01:38
by daniel clark on 09 Aug 2016, 03:09
 my bad ,,forgot this was a le with only mapping for controller ,,  not shure where to go from here ,, you see it in the win system as MIDI 8 ,,Cross wont start with out it plugged up ,, no controls can affect the software ,,meaning that none of the controls on controller make changes in the software 
  January 2012 Mixvibes DJ of the month MEMBER OF:  C00l People MV Society  2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-

daniel clark


-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
by daniel clark on 09 Aug 2016, 03:14
 kinda looked in manual ,,dont read german ,, but saw a screen shot of Cross ,,it had a latter version ,,one with sampler pads ,, have you looked in download section for a update ,, just a shot in the dark . 
  January 2012 Mixvibes DJ of the month MEMBER OF:  C00l People MV Society  2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-

daniel clark


-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
by antoniogr on 09 Aug 2016, 23:02
I tried the latest version and i get no response from the controller. It's really strange that i can only get a flash when i plug it in. I shouldnt be getting power supply issues. Maybe it really is broken..
-
antoniogr

-
- Posts: 5
- Joined: 08 Aug 2016, 01:38
Return to Community Support
Users browsing this forum: No registered users and 27 guests
|
|
|