ERROR MESSAGE WHEN SETTING UP CDJ AISO

[durtyweakend]

Hi, I keep getting a message reading
ERROR WHILE OPENING "Pioneer CDJ AISO" CANT LOAD AISO DRIVER

I have latest version of Mixvibes, latest CDJ350 driver from Pioneer.

I haven't had any problems whatsoever - so impressed with this software !!!! until loading new mixvibes, and latest rekordbox

Any clues anyone???

Regards,

Durtyweakend

[RoJeC]

Could have a few causes.
- ASIO driver is exclusive used by an other program
- issue with driver

Try uninstalling driver from the Win hardware menu (not just by the driver). Ultimate would be to also remove all driver files, but this usually is not needed. Make sure to have the CDJ's disconnected, as well as other programs (potentially) using the CDJ.
Check the Win audio to make sure your local audio is used by default.

Start Cross (only) and see what happens. Reinstalling Cross is not helping for this.

Make sure you do not have any auto started communication (like skype) running.

Please let's know the result.

[durtyweakend]

Hi RoJec, thanks.

However, after trying what you said, still no joy !!!!!!!!!!!!!!

Oddly, I can still control the software when in default direct sound mode, but get no output....

[RoJeC]

Can you access the CDJ ASIO?
Click Windows [START] menu > [All Programs] > [Pioneer] > [Pioneer
CDJ] > [Pioneer CDJ ASIO Settings Utility].

If not the ASIO has a problem (copied this from the installation of CDJ)

Could you post a screen capture of your audio settings in Cross Preferences.

[durtyweakend]

The software recognises the decks OK, and I can control everything, from cue, start, scroll, loop etc, when in both "speakers" mode, but only get sound from the left hand deck...

GGGRRRRRRRRR !!!!!!!!

[Nutty667]

Are your CDJ 350's running the latest firmware ?

Have you set them up to be on different MIDI channels ?
If not heres how you do it;

1 Press and hold the [DISPLAY (UTILITY)] button for 1 second or longer to switch to UTILITY mode.
2 Turn the rotary selector and select [MIDI CH]. Press the rotary selector to choose your selection.
3 Turn the rotary selector and select a MIDI channel (1–4). Press the rotary selector to choose your
selection.

Make sure each deck is on a different channel.

I've had connectivity problems with CDJ 350's on Cross myself, often switching them off and restarting the software works for me.

[durtyweakend]

Yep, done that, just about tried everything, complete delete and re-download - funny thing tho, at the top is says crossdj-free cross3.2.0, never noticed that before

[Nutty667]

I assume you're using an external mixer ?
You sure you've got the software audio setup right. I found the audio setup page a bit unintuitive.

Triple check your physical connections. Try swapping the cdj thats silent in the input of the cdj that makes sound to rule out mixer going duff.

[durtyweakend]

Before I got this upgrade - had mixbvibes since xmas - I had full functionality, HID the lot, I was amazed that it actually worked first time, bloody miracle these days, and had no problems at all.

All my pioneercdj drivers are OK, just get that message.....eeeekk!!!

[daniel clark]

Yep, done that, just about tried everything, complete delete and re-download - funny thing tho, at the top is says crossdj-free cross3.2.0, never noticed that before

hate to ask for a screen shot of this ,, might not be a solution ,,but might be a clue

you should be using Cross for hid compatibility ,,