Discuss technical issues with the community. Mixvibes staff provides no support on this board.
by JackO123 on 08 Jan 2014, 05:22
Hi MixVibes, I am using a Numark MixTrack Pro 2 and a pair of Sony MDR-XB400s and I have them plugged into the Mixer with the cue gain up to full, and the cue mix in the centre (meaning I would be able to hear both tracks playing). But I cannot hear anything coming from the headphones. The sound coming from the speaker is fine, but no sound is coming from the headphones. I've tried them with another software and they work fine  . If there is anything I can do to resolve this issue, please write back. Also, the MixTrack Pro 2 has it's own in-built sound card. Thanks, Jack.
-

JackO123

-
- Posts: 6
- Joined: 08 Jan 2014, 05:04
by JackO123 on 08 Jan 2014, 07:18
Also, I forgot to mention the specs of my laptop: I am using the TOSHIBA SATELLITE Notebook, which is: -Windows 7 -Core i3 -64-Bit OS -Rated 4.5 -I am also running on Windows Service Pack 1
-

JackO123

-
- Posts: 6
- Joined: 08 Jan 2014, 05:04
by LaurentB_4_0 on 08 Jan 2014, 17:46
Hi,
Just a silly question : Can't it be just a matter of hardware Cue/Mix knob position on the controler VS the 2 software Cue AND Mix settings on the GUI ?
It reminds me some headache before I really catch the trick
MacBook Pro OS X Maverick 15" Retina i7 2GHz 8Go RAM 256 Go SSD + Pioneer DDJ-SX + Cross DJ 3.3.9
-

LaurentB_4_0

-
- Posts: 69
- Joined: 02 Dec 2012, 13:45
- Location: Lyon
by JackO123 on 09 Jan 2014, 00:05
Thanks for the reply Daniel, Here is a screenshot of my audio set up. Capture.PNG On my MixTrack Pro 2 in-built soundcard I have no inputs (apart from mic) and one output (which I have connected to my amp via an RCA cable). I've been reading the manual and it says that I should have another output connecting to the cue  . Thanks again for the reply, Jack. 
You do not have the required permissions to view the files attached to this post.
-

JackO123

-
- Posts: 6
- Joined: 08 Jan 2014, 05:04
by JackO123 on 09 Jan 2014, 00:33
Hi Daniel, Thanks loads for the help, but upon reading the manual it told me to install the ASIO4ALL driver, and that has solved the problem! Thanks again for all your help, Jack
-

JackO123

-
- Posts: 6
- Joined: 08 Jan 2014, 05:04
Return to Community Support
Users browsing this forum: Majestic-12 [Bot] and 9 guests
|
|
|