Pioneer ddj-ergo ( mic settings problem )

[ememdems]

Hi guys , i have next question how i can use microphone to hear my voice from speakers use ddj-ergo mic out . with Traktor 2 no problem with voice everything working fine , but in Cross DJ when i going to audio settings , use a aux settings i just can swich mode to line/phone , i don't see settings , aux/microphone . thanks .

[ememdems]

image.jpg

[ememdems]

[attachment=0]image.jpg[/attachment]

[Hannes]

What you want is a bit tricky, as Cross has no dedicated Mic-channel in the software-mixer. (the mic on the U-Mix Control Pro (2) is a hardware channel)

Also you dont need to set the channel to mic in the prefs, line is fine.

solution/workaround for you:

switch to 4 decks -> set input 1/2 for the mic -> switch to line for player A, now the mic is routed thru player A and you can mix with deck C and D.
It's stupid, but atm the only way to have a mic routed thru Cross...
unless of course the mic is a hardware-channel.

image (1).jpg

Unbenannt1.PNG

[ememdems]

Thank you so much, you solved the problem:) now I can play and be aired on radio without any problem.