Gemini CDJ-700

[DjCzar]

Since i have problems using my turntables with this program for some reason, I was wondering if the program will work with the Gemini cdj's. If they are compatible i will trade my turntables for 2 of those. But only if they work with the program.

P.S.
I still have trouble Displaying music videos using the HDMI out from the laptop to any TV. I have tried to use 2 different HDMI cables. When i do all the steps required, right when the image is supposed to be displayed it automaticly restarts the computer, or the screen goes black.

[daniel clark]

Since i have problems using my turntables with this program for some reason, I was wondering if the program will work with the Gemini cdj's.
both turntables and cdj are usable with Cross,,but if you are having problems with timecode with turntables you will have issues with cdj also,,best thing is to get a solution for the problem ,,



If they are compatible i will trade my turntables for 2 of those. But only if they work with the program.

P.S.
I still have trouble Displaying music videos using the HDMI out from the laptop to any TV. I have tried to use 2 different HDMI cables. When i do all the steps required, right when the image is supposed to be displayed it automaticly restarts the computer, or the screen goes black.
has this issue been posted for and was there a solution,,,,

looking at this posting and see that you have issues with your set up ,,,gonna need info on both problems ,,system set up and what have you tried to do to solve them ,,
i would hesitate on getting any thing else untill you get thease two issues resolved ,, but thats just my opion

[DjCzar]

So i finally found out the reason why the turntables were not being recognized and that is because the wires to the M44-7 were old and needed to be replaced so i did, right after i replaced them it worked fine.
The only thing that worries me now is the fact that i cannot show on a monitor any video music mixing. It still does the same as before, i connect the HDMI cable to the laptop and the Monitor once i change it to that cable to show on the monitor it automaticly restarts the computer.
I just don't know what to do about that!

[FigDJ]

So i finally found out the reason why the turntables were not being recognized and that is because the wires to the M44-7 were old and needed to be replaced so i did, right after i replaced them it worked fine.
The only thing that worries me now is the fact that i cannot show on a monitor any video music mixing. It still does the same as before, i connect the HDMI cable to the laptop and the Monitor once i change it to that cable to show on the monitor it automaticly restarts the computer.
I just don't know what to do about that!

Just as a matter for testing. have you tried to use your HDMI cable to TV without starting Cross? You should get your computer screen displayed on the TV just by doing that. This test is to find out if the restart happens from something at the OS level or if it is triggered by an incompatibilty with Cross.

If it still restart upon connecting the HDMI, then i would start looking for the latest video drivers. If you find new ones, then switch your computer to a generic display driver, install your new video adapter drivers, restart and try again just with HDMI and the desktop. Just trying to isolate your problem.

[christiankoopmann]

Hey,

what are the specs of the Computer and have you installed the newest and official graphics Drivers?
if the System suddenly stops working it is mostly a Crash of the System. As you wrote it happens in the time you enable the second Monitor. This sounds for me that your Drivers are faulty or the Hardware is not working correct anymore. BUt first check if the Driver is the newest and also a working and official Driver from your vendor.

and please give us some more Details especial about your Hardware you use.
so give if us some Details especial what vendor your Notebook, type, mybe also the graphics device Name and which Driver you installed and so on.

regards
Christian