Bug avec MV 7.218 sur MEP7000

  
Forum rules
Ce forum ne répond pas au support et demandes d'assistance des utilisateurs.

Veuillez choisir le forum français correspondant à votre logiciel !

Re: Bug avec MV 7.218 sur MEP7000

Postby Support@MixVibes on 05 Aug 2010, 13:59

Alors on va refaire les choses dans l'ordre :
- ton windows Seven est 32 ou 64 bits ?
- les drivers Pioneer sont les derniers ?

Sinon W7 est plus lourd que XP et si en XP tu es déjà limite et bien W7 ne va pas arranger les choses.

Le message est l'ouverture du pilote MIDI du meep 7000 est refusé ;

Qui te sors ce message ? Mixvibes ou Windows ?

Et pourtant cela marche ,que dois je faire ,

le MIDI ? l'audio ? les 2 ?

sachant que les grafiques de mix ne sont pas stable

la fenêtre supérieure avec les 2 waveformes ?
le défilement est saccadé ?

, surtout avec jog ;

Il se passe quoi de plus avec les jogs ?

Dois je trouvé avec precision la latence parfaite ou c'est un autre probléme ?

A moins d'avoir une latence trop basse (qui provoque des sauts), la latence n'a pas d'influence sur l'affichage.
User avatar
Support@MixVibes
 


Re: Bug avec MV 7.218 sur MEP7000

Postby MIDNIGHT84 on 05 Aug 2010, 20:21

W7 en 32 bit
logiciel Pioneer fournis
message de mixvibes
cela marche en MIDI et audio
le rack mix est decalé méme si tempo ok les barre de 1 et 2 ne sont pas aligner

quand je veux ratraper avec jogg c'est casi impossible
MIDNIGHT84
 
Posts: 142
Joined: 22 Feb 2008, 13:48


Re: Bug avec MV 7.218 sur MEP7000

Postby Blackbrook on 05 Aug 2010, 22:29

Hey folks,

if anything in here is worth sharing with all the other MEP users could anyone please write a conclusion in english, so that if anyone is looking for issues with the MEP knows what you are talking about?

I am following this thread all the time, but did not really understand what all of you were writing because of my very very bad french ;)

Thanks in advance!!!!

Steve
Viele Grüße,
Cheers,
A plus,
Steve

Image
Winner Mixvibes 10 years DJ contest 2009


Blackbrook
 
Posts: 4417
Joined: 25 Dec 2007, 14:33


Re: Bug avec MV 7.218 sur MEP7000

Postby Support@MixVibes on 06 Aug 2010, 11:21

Tu devrais prendre des pilotes à jour sur le site Pioneer plutôt que ceux du cd (à moins que ce ne soit la même version).
User avatar
Support@MixVibes
 


Re: Bug avec MV 7.218 sur MEP7000

Postby Support@MixVibes on 06 Aug 2010, 11:33

Blackbrook wrote:Hey folks,

if anything in here is worth sharing with all the other MEP users could anyone please write a conclusion in english, so that if anyone is looking for issues with the MEP knows what you are talking about?

I am following this thread all the time, but did not really understand what all of you were writing because of my very very bad french ;)

Thanks in advance!!!!

Steve


Here we go :
After 3 to 4h, MV sudenly hang and crash : BSOD
- trying to know if it was internal or external drive (sleep mode) doing that : it is not
- trying to know if it is not overheating of the cpu : it is not
It work only 3 nights on 10
- trying to know if the device is still in the device panel when hang/crash : yes it is.
Even windows media player make a BSOD with the MEP
So this is not Mixvibes, it must the MEP or the computer
Blue screen in fact is not exactly blue, it's like a GPU artifacts
Thinking the GPU is overheating.
- T° are ok, no dust inside.
- I tried with a MEP and W7 in Playlist mode for a day and nothing wrong happend.
A new computer is not compatible too...
Took the old one with a fresh install, and now sound crackles

Trying to set the latency on the MEP : not possible.
In fact the AC connector of the laptop is loose
So the computer go into battery mode (low performances).
Now it work but MV can't find the MEP 7000 MIDI driver.
I can't sync tracks with the jogs
User avatar
Support@MixVibes
 


Re: Bug avec MV 7.218 sur MEP7000

Postby Support@MixVibes on 06 Aug 2010, 11:56

Je viens de retester toujours en 7.218 et sous Seven et je n'ai aucun problème de jog.
Le seul message d'erreurs que j'ai eu c'est celui-ci :
mep7000.JPG

et il n'est pas de MixVibes mais de Windows.

Je pense que maintenant il va vraiment falloir chercher le problème ailleurs que dans MixVibes, il te reste 3 éléments :
- ton PC
- ton windows
- ton MEP 7000

Il n'y a aucun problème de compatibilité entre MixVibes, W7 et le MEP7000.
You do not have the required permissions to view the files attached to this post.
User avatar
Support@MixVibes
 


Re: Bug avec MV 7.218 sur MEP7000

Postby MIDNIGHT84 on 06 Aug 2010, 13:31

Vu que vous avez testé le MEP 7000 sur W7 avec mixvibes quel la latence que vous avez utilisé ( config asio mep 7000 )ssuper important
Quand j'ai rentré ma fiche usb du mep 7000 sur l'ordi en usb 3 plus de message mais cela ne marche pas alors que si je branche en usb 2 message m'est cela marche ,
MIDNIGHT84
 
Posts: 142
Joined: 22 Feb 2008, 13:48


Re: Bug avec MV 7.218 sur MEP7000

Postby Support@MixVibes on 06 Aug 2010, 14:04

Standard
mep7000_asio.JPG

Les drivers que j'utilise sont les 1.008 de janvier 2010.
You do not have the required permissions to view the files attached to this post.
User avatar
Support@MixVibes
 


Re: Bug avec MV 7.218 sur MEP7000

Postby MIDNIGHT84 on 09 Aug 2010, 13:55

Malgré toujours le méme message à l'ouverture l'ouverture du pilote MIDI du meep 7000 est refusé
Cela marche parfaitement (test 5H ce WE ); j'ai bien la version 1.008 .
que faut il faire pour supprimer message
MIDNIGHT84
 
Posts: 142
Joined: 22 Feb 2008, 13:48


Re: Bug avec MV 7.218 sur MEP7000

Postby MIDNIGHT84 on 11 Aug 2010, 22:19

Dois je lever l"antivirus et le wifi quand je l"utilise ; merci
MIDNIGHT84
 
Posts: 142
Joined: 22 Feb 2008, 13:48


PreviousNext

Return to Libre accès




Who is online

Users browsing this forum: No registered users and 35 guests

Board index

 
 
   
 
© 2014 Mixvibes