Using 2 eks xp-5

[Marxon]

Ok so i try to help you some more:
i know setting up the jogs is a little bit difficult because no jog is like one other. but i guess we will manage it
please tell me what messages do you recive if
1)you touch your wheel (dont turn it around! just touch it)
2) release your wheel
3)turn left
4) turn right

marxon

[sfronti]

First of all i'd like to thank you for your help!!!

Touch Jogg

midi-ch1 #90 9 7f (noteon 9 127) command=0

Release Jogg

midi-ch1 #90 9 0 (noteoff 9 0) command=0

Turn Right
midi-ch1 #b0 60 40 (controlchange 96 64) command=0

Turn Left

midi-ch1 #b0 60 40 (controlchange 96 64) command=0

Thanks a lot
Stelios, Greece

[Marxon]

ok i might found a mistake in the orginal MIDI config.
try this one:

[sfronti]

Thank you very much for your quick response..
Here is the solution, at last!!!!

#90 9 7f PRESSWHEEL 1 1 20 JOGPRECISE JOGPOLLING
#90 9 0 PRESSWHEEL 1 0 20 JOGPRECISE JOGPOLLING
#b0 61 41 JOG2 1 0.000000 300 JOGPRECISE JOGPOLLING
#b0 61 3f JOG2 1 0.000000 300 JOGPRECISE JOGPOLLING

Thanks a lot
Stelios, Greece

[Marxon]

No problem!
if everything is working now you couldt spend some karma

best regards Marxon

[sfronti]

An other very very good thing is that i use both xp5 with one MIDI input enble so the other one is free for something else (faderfox dj2 or uc33).

Thank a lot
Stelios, Greece

[Marxon]

You even couldt use your both xp-5, faderbox AND the uc33 toghether
on one port. Let me know if need more informations

[sfronti]

These should be the right settings for the joggs but in this way the don't work properly

#90 9 7f PRESSWHEEL 1 1 20 JOGPRECISE JOGPOLLING
#90 9 0 PRESSWHEEL 1 0 20 JOGPRECISE JOGPOLLING

#b0 61 JOG2 1 0.000000 300 JOGPRECISE JOGPOLLING

So i split the jogg2 in 2 different settings for each direction. So the settings for joggs became to:
#b0 61 41 JOG2 1 0.000000 300 JOGPRECISE JOGPOLLING
#b0 61 3f JOG2 1 0.000000 300 JOGPRECISE JOGPOLLING

Now the joggs working properly but:
When i press play/stop and move jogg to the point that i want to make a cue and leave the jogg the player keeps moving, slowly, but it is moving.
So i have to touch again the jogg to stop player.
If i don't touch again i can make a cue point but ,while track is moving, when i push cue again the player does not start, only when i push play.Pressing cue returns track to the cue point but it does not play pushing it.

Thanks a lot!!!
Stelios, Greece

[Marxon]

Hi again sfronti!

Try to activated the "JOGTIMER" flag on the PRESSWHEEL and JOG commands

[sfronti]

I thinkt this is the problem..thanks a lot!!!

Uncheck JOGPRECISE and JOGPOLLING to all commands and tick only JOGTIMER and now the joggs seems to work right!!!

Thanks a lot!!!
Stelios, Greece