DVS U-MIX44 dosen't recognize Stanton T92

[eskillo]

djegun, I've bought DVS and I've a manual installation or Quick start Guide, I've read it thousand times and installed software another thousand times, I said that I've done those steps that tou said to read a lot of times and still doesn't work.
I've done everything that manual say and the software stills not recognize the vinyl player.

here's the configuration:
Config 2010/01/08 16:31

OS=Microsoft VISTA Service Pack 2 build=6002 processor=PROCESSOR_IDENTIFIER=x86 Family 16 Model 2 Stepping 2, AuthenticAMD
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=Yes Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=4 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

Thank you
Regards André L.V.

[Support@MixVibes]

Le key lock n'est pas engagé sur les platines ?

[eskillo]

I've unistalled and installed once again DVS software,following all steps again and guess what...nothing have changed.

I insist, the problem is in something that has to do connection with the shown bars on the right of out/in devices.
Take a look, when media player is playing, there's a green signal showing that sound-card is playing sound, when I put the control vinyl playing to calibrate the player, there's a signal shown by orange led in U-MiX44 INPUT 1/2 but in Windows there's nothing showing that line-in is receiving signal.

in this link http://mixvibes.com/support/?p=815&lang=en there's line-in "bars", in my windows there's not.

[eskillo]

key lock is off, the needle and the connections are well too and pitch is on zero.

[eskillo]

I've tried now, in a computer of friend of mine (whit Vista too) and it work perfectly

So...the problem is in my PC it can be sound drivers or something like that.
What I gone do now !? lol any ideas ?

*A format must resolve the problem I think, but it should be another solution

oh god . . . help me ! lol

Regards André L.V.

[djegun]

*One question: why do you use asio4all drivers instead of the U-Mix44 asio driver provided with the DVS U-Mix solution? FYI, u-mix44 drivers are automatically installed when you install the DVS software.

*

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=ASIO4ALL v2 AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=4 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2

There is a problem there. Try to use the u-mixx44 drivers

[eskillo]

I've done installation following steps of quick start guide, and DVS didn't recognize the turntables so I searched out for solutions and installed Asio4all.

That problem can be resolved with Asio4all, it appears like that in configuration cause I installed again to show you like you asked.

look

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=47 Driver sampling=44100 Nb Input=4 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2

If I install Asio4all I can correct this problem but the DVS still can't calibrate the player properly.

[eskillo]

here it is what you want to see, look too for what I'm saying about Windows...

Config 2010/01/09 14:10

OS=Microsoft VISTA Service Pack 2 build=6002 processor=PROCESSOR_IDENTIFIER=x86 Family 16 Model 2 Stepping 2, AuthenticAMD
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=47 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[Support@MixVibes]

Nb Input=4 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2

Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2

This is U-Mix44 drivers vs. asio4all ones ?

If it work flawlessly on an other computer you should remove any asio soundcard drivers you have, clean the registry and restart from scratch with the U-Mix ones only.

[eskillo]

Please read older posts.