Having trouble setting up Audio and MIDI for CDJ400s

[Thrilos]

Hi all, I am new to Cross, and I am trying to run the program using my 2 cdj400s and an external mixer, and my PC. For some reason I cannot control the songs from my controllers. Can anyone help me on what I need to to do in the audio and MIDI setup to get this to work. Thanks for your help in advance.

[phadedvision]

Hi Thrilos, welcome to the forum!

Try following these instructions and see if it works out for you: http://mixvibes.com/support/?p=315&lang=en

Peace!

[KANZEREBRO]

Remember to go Options-Preferences-Midi, then you choose your cdj's... but first you'r cdj should me in the presset ona in MIDI CHANNEL 1 and the other in MIDI Channel 2.... ( you set them in the configuration of the CDJ ( internal of that device )... also if that doesn't work you after you set them as controllers ( in your PC ), close mixvibess, turn them ON... and now open the software

[Thrilos]

I will give it a try! Am i doing something wrong in the audio setup maybe? Thanks alot for your help, I will let you know the progress!

[Thrilos]

No luck on getting the cdj400s to work. I get sound through my external mixer, but the controllers do not work, I can only control from the PC. Here is what I have my preferences set too. And both cdjs are set to midi1 and midi2 separately.

Audio
Pioneer CDJ-400 ASIO

Active Input
Nothing

Active Output
CDJ-4001(1)
CDJ-4001(2)
CDJ-4002(1)
CDJ-4002(2)

Routing
External Mixer

MIDI
MIDI 1
Pioneercdj-400midi MIDI Channel 1

MIDI 2
Pioneercdj-400midi MIDI Channel 2

For both MIDI I select the cdj400 picture for mapping.
If anyone can help that would be great! Thanks in advance!

[djegun]

Hi,
Look at the screenshots below to configure the MIDI setup of the two cdj's together.

cdj400_midi_setup1.png

cdj400_midi_setup2.png

[Thrilos]

I will try it out thanks a lot!

[Thrilos]

Hi again,
So I have tried what has been suggested and it looks as if the CDJ buttons I press, light up the corresponding buttons on the mixvibes screen. But I cannot get the Play/Pause button on my CDJ to start the song in mixvibes. Does anyone have any suggestions?

[Support@MixVibes]

Did you disable the external control ?

[Thrilos]

Hello all, and thanks for your help! I am getting closer to getting everything to work, I have one little step left! I am now getting sound to come through my external mixer but only for one CDJ 400 controller. The other controller looks like it still controls the other deck but I am getting no sound. I can see it controlling on screen and the track is playing but no sound! Any recommendations on why this is happening and how I can fix it.
I have setup the MIDI controls like shown above in the screen shots, and controlling seems great, but only sound coming from one controller.
I noticed under the audio preferences, under output 1, I have selected: output1/output2. Under output 2 nothing is selected. When I try to click on Output1/output2 for that, it switches sound to the other deck, but takes away from the original deck.
How can I get both decks to be heard through the external mixer, so I can use the mixer to control the mix?
Thanks for help!