Please help!>

[phadedvision]

how much latency i should put for some speedy scratches?

128 will do the trick. 256 isn't half-bad either.

[DJ MIRKO]

This is my new config, everything work good, only my card still don't react at all. I realy don't know what to do
Please help!!!
I hear sound, but volume I control on my amp, because card don't react.


OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=2 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=No Preamp Left=3 db Preamp Right=3 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.494 Volume max right=0.494 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=No Preamp Left=7 db Preamp Right=6 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.577 Volume max right=0.577 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[wazza]

can you post a snapshot pic off you U46 sound card control panel & your out-put rack in mixvibes

you are using the stanton T120...the T120 have pre-amp on the turntable...so try to run you sound card in line

when you did the config report did you run the time code vinly
because you have no time code Quality

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.577 Volume max right=0.577 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

time code percent=0.500

you should have 99.00 %