Please help!>

[DJ MIRKO]

I was installed evrything by the video tuttorial, but when i started, i have signal on my mixer(vestaxpmc06), but mixer and card do not react on system at all. Master level on mixer and card is on minimal, but i hear everything on mu speakers. When i manipulate on record everything work ok, but my crossfader, gains, mid, treble... don't work, same thing is on card
My turntables are StantonT.120.

[wazza]

HI Mirko...
can you please post a config report....so we can see all yous setting

to make a config report ....in mixvibes go option / config report
that will make a text file...copy & paste text into this forum post

a config report will look something like this

Config Report:

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
MixVibes Producer version=7.033 DLL langage=US version=7.030

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=3 Nb Mixer=0
Managment Type ASIO
Device=EDIROL FA-66 AsioVersion=0 DriverVersion=275
Latency=7 Driver sampling=44100 Nb Input=6 Nb Output=6
Managment Type ASIO
1-LineOut 1&2 left 2-LineOut 1&2 right
3-LineOut 3&4 left 4-LineOut 3&4 right
5-SpdifOut left 6-SpdifOut right

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:MicIn1 left-MicIn1 right
Mode=Relative time
Riaa=No Preamp Left=44 db Preamp Right=44 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=99.320 Volume max left=0.273 Volume max right=0.288 Volume optimum=0.370
Speed Average(100ms)=1.002 Speed Average(1s)=0.999 Speed Average(3s)=1.000


Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected

( when you do a config report play both your time code vinly & set the pitch to 0.00% )

[DJ MIRKO]

I was reinstall system, and same thing again:

Config 2009/10/31 15:19

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 6, GenuineIntel
MixVibes DVS version=7.010 DLL langage=US version=7.000

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Style=XP2005
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=Absolute
Riaa=Yes Preamp Left=2 db Preamp Right=2 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.350 Volume max right=0.343 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=Absolute
Riaa=Yes Preamp Left=6 db Preamp Right=5 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.394 Volume max right=0.388 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[wazza]

1)..frist up your using 7.010...so you need to do your up-date to 7.21

2)..why are you using RIAA pre-amps in the software when your sound card has it own pre-amps.???

[DJ MIRKO]

this is options by default. please tell me where and what i should change

[DJ MIRKO]

now i fix this problem, but now i have signal only on 1 one side of mixer and it's too loud.
And timing is not so good

[wazza]

we will start right at the beginning....I will ask some ???? as we go

1)..plug your turntables outputs to the sound card inputs...
left turntable go's to sound card inputs 1&2 , right turntable go's to sound card 3&4....now sound card outputs 1 & 2 + 3 & 4 go to the mixers line input ( not the phono inputs )
sound card output 1 & 2 go's to the left channel and 3 & 4 go's to the right channel on you mixer
....[ so check your mixer line / phono switch to see if its set to line ]

now before you do anything in mixvibes you have to do a windows XP tweak...
in window go start / control panel / system / advanced / in the performance box click the setting box...another window will open up with the title performance options...go advance / now in the processor scheduling box click on background services
this will give you more processor power to mixvibes & make mixvibes run better for time code vinly

now to start the mixvibes set up
do a install wizard...go options / install wizard
the install wizard will set up the sound card for you

now go back to option / peference / sound card & vinly page to do your fine-tuning...[ like to turn off the Riaa pre-amps

[wazza]

now i fix this problem, but now i have signal only on 1 one side of mixer and it's too loud.
And timing is not so good

ok now we are getting somewhere

for the sound being to loud...turn down the 2 gain knobs on the front off the sound card & turn down the line outputs in mixvibes output rack up in the tool bar...[ on my sound card I have the 2 gain knobs down to off & I tune with the output rack just a bit]

for the two deck being on one side
check the output number on the mixvibes skin
deck 1output number 1...deck 2 output number 2

[DJ MIRKO]

now i fix that too, now i got another problem, i hear mu right turntable only on left side of speakers, and my card still don't react on anything. When i increase volume on card nothing is hepen, just like with gains, but everthyng else is seams to work good - with out card!?

[DJ MIRKO]

how much latency i should put for some speedy scratches?