[solved]one channel to calibrate successfully

   Forum closed (read only)
Forum rules
PLEASE.READ.FORUM.RULES.SUPPORT.UPDATE


FORUM CLOSED PLEASE POST in NEW TECHNICAL FORUMS BY SOFTWARE FAMILY

* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to be sure your problem hasn't been solved already
* Write in concise and precise ENGLISH Thank you.

[solved]one channel to calibrate successfully

Postby djzmixman on 24 Jun 2009, 02:08

Hi i just installed Mixvibes DVS Edition to my PC along with the maya 44 interface. I am using a pair of 1200's and a mixer and everything works fine including the needles. I used the instlation wizard and when it get to the calibration result 2 it shows nothing
errscreen.jpg


And it my second channel does not work. It by be some small mistake but i feel like i tried everything I am new to mixvibes and could really use some help so I could start mixing. Here is the configration report.
config.txt
You do not have the required permissions to view the files attached to this post.
djzmixman
 
Posts: 12
Joined: 22 May 2009, 21:58
Location: Yigo, Guam


Re: Could only get one channel to calibrate successfully

Postby abitmessie on 24 Jun 2009, 04:52

your config file shows that all channels have been setup 1 2 3 4
and 3 and 4 are set to vinyl 2
If you continue through the wizard and go into options and the vinyl tab
put needle on the record can you see vinyl 2 getting a signal?
Producer 7.4, DVS 7.4, Cross 1.3.2,
M-Audio Quattro, U46mk2, Evolution UC33, LaunchPad Technics 1200sl Mk2 , Rane Empath, DDM4000
Windows 7 (Abits Build v2)

Image
User avatar
abitmessie
 
Posts: 527
Joined: 03 Jan 2007, 13:00
Location: Melbourne Australia


Re: Could only get one channel to calibrate successfully

Postby djzmixman on 24 Jun 2009, 07:38

errscreen2.jpg

I still get no signal from the vinyl

I also get this screen when i push the calibrate button for player 2
errscreen3.jpg

I have no idea what that means
You do not have the required permissions to view the files attached to this post.
djzmixman
 
Posts: 12
Joined: 22 May 2009, 21:58
Location: Yigo, Guam


Re: Could only get one channel to calibrate successfully

Postby abitmessie on 24 Jun 2009, 08:25

you are getting that error due to mixvibes not seeing the timecode!

not sure why you are having these issue however might be worth while downloading the latest drivers and DVS update from the download section of this forum

http://forum.mixvibes.com/downloads.php

Uninstall your old driver and install this new one
hopefully this fixes your issue
Producer 7.4, DVS 7.4, Cross 1.3.2,
M-Audio Quattro, U46mk2, Evolution UC33, LaunchPad Technics 1200sl Mk2 , Rane Empath, DDM4000
Windows 7 (Abits Build v2)

Image
User avatar
abitmessie
 
Posts: 527
Joined: 03 Jan 2007, 13:00
Location: Melbourne Australia


Re: Could only get one channel to calibrate successfully

Postby UncleVibes on 24 Jun 2009, 09:25

what happens when you inverse the turntables on the inputs? I want to be sure you don't have a wire problem.
UncleVibes
 
Posts: 10254
Joined: 22 Sep 2003, 14:36


Re: Could only get one channel to calibrate successfully

Postby Esca on 24 Jun 2009, 09:42

with your mixvibes closed are you able to ear the timecode signal trough the input of your sound card?try by checking that all the settings in the maya44 control panel are the same for both the pair of inputs, and as UncleVibes said try to switch the two input and check what happens.

let us know :cool:
User avatar
Esca
 
Posts: 568
Joined: 14 Sep 2007, 10:00


Re: Could only get one channel to calibrate successfully

Postby djzmixman on 25 Jun 2009, 00:49

Ok guys it was something with my mixer. I switched it out and everything works fine now. Thanks for all your help.
djzmixman
 
Posts: 12
Joined: 22 May 2009, 21:58
Location: Yigo, Guam


Re: Could only get one channel to calibrate successfully

Postby abitmessie on 25 Jun 2009, 01:17

Anytime mate!
hopefully you can get your mixer fixed!
enjoy MixVibes!!!!!!!!!!
Producer 7.4, DVS 7.4, Cross 1.3.2,
M-Audio Quattro, U46mk2, Evolution UC33, LaunchPad Technics 1200sl Mk2 , Rane Empath, DDM4000
Windows 7 (Abits Build v2)

Image
User avatar
abitmessie
 
Posts: 527
Joined: 03 Jan 2007, 13:00
Location: Melbourne Australia


Re: [solved]one channel to calibrate successfully

Postby Esca on 25 Jun 2009, 11:37

Perfect, another goal for mixvibes ;)
eheheh :cool:
User avatar
Esca
 
Posts: 568
Joined: 14 Sep 2007, 10:00



Return to Technical support




Who is online

Users browsing this forum: No registered users and 12 guests

Board index

 
 
   
 
© 2014 Mixvibes