NO TIMECODE SIGNAL

[gunther]

I have sound but I can only control MP3 via mixvibes on my PC and not via turntables pack20.

Config Report:

Config 2009/04/12 18:07

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 6 Stepping 2, AuthenticAMD
MixVibes DVS version=6.391 DLL langage=US version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Moveable=No
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No
Noise=Yes Vol=0 Crakle=Yes Vol=0 Back Mute=No Scratch Sensibilty=0

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Kernel
Device=SoundMAX Digital Audio Latency=24
Device=USB Sound Device Latency=24

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=USB Audio CODEC source=default
Mode=Absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 2 not connected

[UncleVibes]

Go in the donload section & found the update related to your soft.
Go in the vinyl options & write 43db for input L & R click on apply.

Manual tuning DJ tech pack evolution.jpg

[gunther]

Hi,

Already thanx for your help. I downloaded the newest software and installed it. Then I followed your instructions but still it is not working. It keeps saying timecodesignal analysed too low (0%)

Kind regqrds,
Gunther

[UncleVibes]

publish a config report & a snapshot of your vinyl options please.

[gunther]

Here it is:

Config 2009/04/13 21:22

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 6 Stepping 2, AuthenticAMD
MixVibes DVS version=6.412 DLL langage=US version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Moveable=No
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Kernel
Device=SoundMAX Digital Audio Latency=24
Device=USB Sound Device Latency=24

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=USB Audio CODEC source=default
Mode=Absolute
Riaa=No Preamp Left=43 db Preamp Right=43 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms
Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 2 not connected

[UncleVibes]

Publish your vinyl options. Make a screenshot of them when the vinyl is playing

[gunther]

Hi,

I can not get the snapshot in this forum, but I can tell you that I have a flat line.

Kind regqrds,
Gunther

[gunther]

Hi,

Problem fixed by installing new usb 2.0 ports.
Anyway. Thanx for all the help.

Gunther