Reverse and (What the f_k is that) + Video

[marco999]

HI guys,
I have a new problem -.-
So what the f_uck is that here..
I made a video because i cant explain the problem here..
Please help me
Video Downloadlink....http://sampmaps2.bplaced.net/mixvibes/mixvibes.avi

After the reverse comes i must resart Mixvibes and after 10 Seconds or so the Reverse comes again....

[gakto2009]

Are you using timecode cd/vinyl?

[marco999]

i am using a timecode vinyl...

[gakto2009]

can you post me a currnet config report with your vinyl spinning at 0 pitch.. pweeez

[marco999]

so i have make pics of my configuration... i am not sure if this is what you mean,but the config is in german because i come from germany =)
http://sampmaps2.bplaced.net/mixvibes/pics/

[gakto2009]

Hi,
It doesn’t matter if your config report in German, the numbers all mean the same thing, lol.

Take a look at “vinyl2.jpg”, if you are using vinyl control it would be better for you if you used the “ASIO” configuration, not “Multi Audio”.

“vinyl1.jpg” does not shown with the vinyl playing on your turntables so i cannot see the quality of your timecode.

Reconfigure your settings using ASIO and setup your inputs/outputs accordingly, though you may not get the best results using the audio devices you are using... Realtek onboard audio devices are known for issues with receiving interference from other system devices such as PSU’s and HDD’s.

Regard,
Bryan

[marco999]

okay so first i have make a video of my vinyl config
here you can download it
http://sampmaps2.bplaced.net/mixvibes/mixvibes2.avi

[gakto2009]

Please please please post a configuration report generated by Mixvibes.

[marco999]

ok so...

Config Report:

Config 2009/01/04 13:38

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 67 Stepping 2, AuthenticAMD
MixVibes DVS version=6.391 DLL langage=DE version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Moveable=No
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No
Noise=No Vol=0 Crakle=No Vol=80 Back Mute=No Scratch Sensibilty=0

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Kernel
Device=USB Sound Device Latency=24
Device=Realtek HD Audio output Latency=24

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=USB Audio CODEC source=default
Mode=All relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=USB Audio CODEC (2) source=default
Mode=All relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

//////////EDIT:
Ok so i think it comes only when i pitch....

[marco999]

ok i think it must work now i have edit my config...