[keep 7.1] Bpms are not exact using the update.

[DanceCode]

Hello! I posted this yesterday but for some reason it was deleted I think.
The thing is that since I updated mixvibes the bpm are not exact... it has an error of 0,1% sometimes. So in my cdj800 i put +0,8% for example and mixvibes sometimes shows 0,7%, 0,8% or 0,9%, and in the previous version I didnt have that problem.
So mixing it isnt comfortably.
I have the driver of u46 updated.

Config Report:

Config 2008/12/20 18:45

OS=Microsoft Windows XP Service Pack 2 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes DVS version=7.200 DLL langage=US version=7.200

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=Yes History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=4 Nb Mixer=0
Managment Type Multi Channel
Device=SigmaTel Audio Latency=120

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=SigmaTel Audio source=
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=83 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.050 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio= source=
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=67 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

I hope you can help me.

[dj tribalistic]

yes same problem for me too
i have posted the same problem for 2 weeks in french here
please help

Config Report:

Config 2008/12/21 01:58

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
MixVibes Producer version=7.214 DLL langage=FR version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=No Auto Match at load=Yes
Bpm Range min=120 max=140
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=Yes

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=Creative ASIO AsioVersion=0 DriverVersion=2
Latency=40 Driver sampling=48000 Nb Input=10 Nb Output=2
Managment Type ASIO
1-Vorne L/R 2-Vorne L/R

Vinyl Configuration
--------------------
Vinyl 1 not connected
Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected

[gakto2009]

Hi dancecode,
I see you are using Mixvibes DVS 7 v7.200, this update was pulled due to some bugs that were found after its release date, please revert back to the official update of DVS v7.100 as this is a stable official release.

Or if you want to check out the new RC version of Mixvibes DVS 7.214, you can find it here...

Update DVS 7.21 & releases notes

This update is not recommended for public use, it is for testing ONLY.

Regards,
Bryan.

Back to work for me

[DanceCode]

I had installed the 7.1 version and now its working good.

[dj tribalistic]

i think we must send a feedback to the Producer team as a serious bug in the v 7.2 and 7.214

[DanceCode]

Yea... at least I realized at home. I could have a bad night :P

[gakto2009]

i think we must send a feedback to the Producer team as a serious bug in the v 7.2 and 7.214

Hi tribalistic,
if you would like to report your findings then please do so here,

viewforum.php?f=313

This would be very helpfull, thanks for your time.

regards
Bryan