Mv Skipping Problem: Optimization?

[xxwaznxx]

Hi, since i've had Mixvibes, which has been only two weeks, i seem to have a problem when i'm simply moving the vinyl back and forth. While i'm moving it back and forth, sometimes it randomly skips to other portions of the music, and everytime i have to spin it back to the previous position. Is there anyway to prevent this kind of skipping problem? Also, are there any options that i can make to optimize mixvibes so that it can run at it's best?

[jiel]

hello,

can you post a config report please ?
http://www.mixvibes.com/site/pageeng/page.php?x=faq#ancre6

[polocorp]

hi xxwaznxx, please post your config report with both decks spinning and you needles on the time code record

[xxwaznxx]

Config 2008/11/26 16:28

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=No AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO 2.0 - ESI U46 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=absolute
Riaa=Yes Preamp Left=3 db Preamp Right=3 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=97.781 Volume max left=0.340 Volume max right=0.359 Volume optimum=0.370
Speed Average(100ms)=1.003 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=absolute
Riaa=Yes Preamp Left=6 db Preamp Right=5 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=98.088 Volume max left=0.352 Volume max right=0.384 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=0.999 Speed Average(3s)=1.001

[xxwaznxx]

if anyone can take a look at my config report and give me any suggestions to make Mixvibes even a better experiencefor me (besides the skipping problem) will gladly be appreciated. THANK YOU!!!

[N-deep]

The report seems to be ok. What driver version do you use?

[xxwaznxx]

Alrite...i think it might have been a problem of the needle skipping...sorry about that, but thank you for your help! if you can see anything in which i can tweak to make mixvibes perform better through seeing my config than any reccomendations are welcomed please

[N-deep]

What driver version do you use?

[xxwaznxx]

Mixvbes version 7.100
U46mk2 1.0.41

[polocorp]

you are up to date, and your ste up is fine. i guess you should check the wait on your needles and change them if they are skipping around unecessarily.

Hope to see you post mixes and pix of your set up in the community forums !