settings for DVS mk2 with cd decks and mixer?

[proalless]

my first play with DVS mk2 with 2 cds (cdj200) and a mixer (djm500)
i can control my mix with decks only in absolute mode
and master tempo not works(i know that) but i want this setting

my settings in decks is auto cue off master tempo off
my settings in mvs is vinyl (only when is on i have sound)
when i m going in another setting rel or all real
i can control the mvs from decks and the sound is unstable

i want to know the best settings for DVS to play and control
from decks and mixer with master tempo works from software

mvs version is 7.1 and driver 1.039
is it bug or it is some settings have to do for better performance
my laptop run win xp pro sp3
i have 4 gib ram

sorry for my bad english

[sakaana]

Hey,

so what exactly is your problem ? That you can`t the build in MasterTempo of your CD Players ? Well there`s nothing you can do against it, you have to use the Software`s Mastertempo feature.

This is cause there`s only a timecode signal on the CDs.

[polocorp]

hi proalless, welcome on the forum. the best control mode is absolut mode for CD decks (it allows CUE points). The master tempo is being improved in the next update. you should mix without in the mean time.

edited on nov 14th

[proalless]

my problem is that i can play ONLY in absolute mode
when i set real or all rel mvs not play with cd decks
thats my problem.
i cant control with decks the que point when i try to play
in this 2 settings (vinyl on- vinyl off its the same result)
and i have to play only in absolute mode.
i can wait for the next update

[N-deep]

Can you try to send us a configuration report in relative mode? Do not forget to play 1st CD track.

[proalless]

Config Report:

Config 2008/10/30 15:09

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 6, GenuineIntel
MixVibes DVS version=7.100 DLL langage=US version=7.100

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO 2.0 - ESI U46 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=all relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.854 Volume max right=0.861 Volume optimum=0.370
Speed Average(100ms)=1.171 Speed Average(1s)=1.170 Speed Average(3s)=1.171


Vinyl2 connected=CD
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=all relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.748 Volume max right=0.514 Volume optimum=0.370
Speed Average(100ms)=1.159 Speed Average(1s)=1.169 Speed Average(3s)=1.171

when i take this report picth control in my PC goes up and down
very fast.

[polocorp]

i edited my previous post, best mode is still absolut after extensive testing. The master tempo will be implemented in the next update.

the pitch movements are 'normal'. they don't mean your pitch is unstable, they just correspond to micro movements of your deck. Your pitch should still be stable in the mix