DENON S3500 Master Tempo ???????? H E L P

[ajdj39]

Hello!!

I have the demo Ver. of MixVibes and I am using my friends HD Control CD's.... So far I love MixVibes It looks clean and it seems to run great on my PC!!!!

I am using Denon DN-S3500 CD player's to run the time code and all is well!!! Except for the the master tempo!!!!

When I use the master tempo + or - it sounds really bad, Almost like the pitch keeps changing really fast....

If this problem can be solved then I'm going to buy the full Ver. of MixVibes ASAP!!!!

PLEASE HELP ME!!!!!

MY Config:

Config 2008/08/25 00:14

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel
MixVibes DVS version=6.363 DLL langage=US version=6.290

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Priority program=normal Low gui priority=Yes Equalization bypass=Yes
Microsoft codec=No MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Caption=No Style=XP2005
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=No
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Lock Out=Yes Volume=Yes Equalization=Yes Loop=No Effects=No
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No
Noise=No Vol=0 Crakle=No Vol=0 Back Mute=No Scratch Sensibilty=0

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=BEHRINGER USB AUDIO AsioVersion=0 DriverVersion=34082304
Latency=2 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1-OUT 0 - BEHRINGER USB AU 2-OUT 1 - BEHRINGER USB AU

Vinyl Configuration
--------------------
Style mix=scratch

Vinyl1 connected=CD
Audio=ASIO source=0:IN 0 - BEHRINGER USB AU-IN 1 - BEHRINGER USB AU
Mode=Absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
Vinyl2 connected=CD
Audio=ASIO source=0:IN 0 - BEHRINGER USB AU-IN 1 - BEHRINGER USB AU
Mode=Absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[wazza]

with all C.D Player you should use RELATIVE TIME MODE or ALL RELATIVE not ABSOLUTE MODE

All the denon C.D PLAYERS that I have tested with mixvibes run better in RELATIVE TIME MODE with time code C.D


it has been a long time since I had my DN-S 3000's & 5000 so I'm going of memory

GIVE THIS A TRY.....in mixvibes just above the PITCH FADER thear is a button that has speed , key and tempo

so when you change from pitch to master tempo on your denon 3500 you also have to change from speed to key in mixvibes
I think or it might be from speed to tempo....I can't remember

[ajdj39]

Thanks for trying to help me ..... But Unfortunetly that does not work!!!...... still the same problem......

I was reading on a Alcatech DigiScratch Forum that no matter what the software / Hardware you are using Master Tempo/Key Lock will never work with Time codeing Because its destorts the code!!!! the only way to have master tempo working is to put your player to PITCH and then have some software that can convert it to Key Lock........ So I downloaded a demo of Virtual DJ and this is true!!!!!!!!!! It works I use pitch and it all stays on key!!!!!!

So now my next Question is Can this be done with MixVibes????????? I REALLY REALLY hope so

[N-deep]

Indeed. Using the master tempo feature from the CD decks will always destroy the original timecode of the control CD. You'll have to use the software's master tempo.

FYI the Cross's master tempo will be one of the best among the DJ market.