edirol fa 66 users ?

   Forum closed (read only)
Forum rules
PLEASE.READ.FORUM.RULES.SUPPORT.UPDATE


FORUM CLOSED PLEASE POST in NEW TECHNICAL FORUMS BY SOFTWARE FAMILY

* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to be sure your problem hasn't been solved already
* Write in concise and precise ENGLISH Thank you.

Re: edirol fa 66 users ?

Postby UncleVibes on 22 Jun 2008, 21:35

Your answer is wrong. It's sunday, I am not oblige to think one minute about your problem & I answer you twice today. I don't have the right answer but of course there is one as the soft proves since years it's ability on different generations of PC.
I will send monday copy of your post to the developers.

Did you try to invert the phase in the vinyl options advanced?
UncleVibes
 
Posts: 10254
Joined: 22 Sep 2003, 14:36


Re: edirol fa 66 users ?

Postby UncleVibes on 23 Jun 2008, 09:05

Code: Select all
[b]Riaa=No Preamp Left=50 db Preamp Right=46 db Noise Filter=0 Hz[/b]


You have a very important diaphony. Why? Try with an another needle...
UncleVibes
 
Posts: 10254
Joined: 22 Sep 2003, 14:36


Re: edirol fa 66 users ?

Postby mydogrizla on 23 Jun 2008, 11:04

yes i have try with phase invert and also i have used different needles still the same problem ? i am sorry for being so rude and blunt in my last post but i was very upset with my new setup i have spent £700 on new decks £180 on new needles £200 on new sound card £500 on new PC £ 30 on v2 vinyl and still no joy i thought my problem was maybe my old decks so i got new one then i thought maybe its my delta card so i bought a edirol because i knew the team used this card ..................... could it be because of my card set up ? or do you think it is more likely to be my mixvibes settings ? :unsure:
MY NEW SETUP
Vestax PDX3000 X2
Vestax PMC 05 PRO 3
Q BERT THUDRUMBLE CONCORD NEEDLES
EDIROL FA 66
intel duo2core 6600@ 2.40GHz
1GB of ram
User avatar
mydogrizla
 
Posts: 172
Joined: 19 Feb 2006, 16:30
Location: NORTH EAST ENGLAND


Re: edirol fa 66 users ?

Postby mydogrizla on 23 Jun 2008, 11:05

uncle vibes could you post your config report for me to look at to see what it should look like ?
MY NEW SETUP
Vestax PDX3000 X2
Vestax PMC 05 PRO 3
Q BERT THUDRUMBLE CONCORD NEEDLES
EDIROL FA 66
intel duo2core 6600@ 2.40GHz
1GB of ram
User avatar
mydogrizla
 
Posts: 172
Joined: 19 Feb 2006, 16:30
Location: NORTH EAST ENGLAND


Re: edirol fa 66 users ?

Postby mydogrizla on 23 Jun 2008, 11:19

after trying different settings on the edirol card when i move the SENS knobs and recalibrate i am getting different reading , where shud i have these knobs positioned ? will this help ?
MY NEW SETUP
Vestax PDX3000 X2
Vestax PMC 05 PRO 3
Q BERT THUDRUMBLE CONCORD NEEDLES
EDIROL FA 66
intel duo2core 6600@ 2.40GHz
1GB of ram
User avatar
mydogrizla
 
Posts: 172
Joined: 19 Feb 2006, 16:30
Location: NORTH EAST ENGLAND


Re: edirol fa 66 users ?

Postby UncleVibes on 23 Jun 2008, 11:37

Config Report:
Config 2008/06/23 11:47

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
MixVibes Producer version=7.033 DLL langage=FR version=7.030

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No
OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
MixVibes Producer version=7.033 DLL langage=FR version=7.030

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=EDIROL FA-101 AsioVersion=0 DriverVersion=553
Latency=3 Driver sampling=96000 Nb Input=10 Nb Output=10
Managment Type ASIO
1-LineOut 3&4 left 2-LineOut 3&4 right
3-LineOut 5&6 left 4-LineOut 5&6 right

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=2:LineIn 3&4 left-LineIn 3&4 right
Mode=Absolute
Riaa=No Preamp Left=48 db Preamp Right=48 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=98.332 Volume max left=0.398 Volume max right=0.425 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=4:LineIn 5&6 left-LineIn 5&6 right
Mode=Absolute
Riaa=No Preamp Left=46 db Preamp Right=47 db Noise Filter=0 Hz
45T=No InverseLR=Yes PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.410 Volume max right=0.382 Volume optimum=0.370
Speed Average(100ms)=1.003 Speed Average(1s)=1.001 Speed Average(3s)=1.000


Vinyl 3 not connected
Vinyl 4 not connected
UncleVibes
 
Posts: 10254
Joined: 22 Sep 2003, 14:36


Re: edirol fa 66 users ?

Postby UncleVibes on 23 Jun 2008, 11:39

My cable are inersed so it's on Inverse L&R
UncleVibes
 
Posts: 10254
Joined: 22 Sep 2003, 14:36


Re: edirol fa 66 users ?

Postby mydogrizla on 23 Jun 2008, 12:00

could you tell me about the SENS knobs on the edirol card ? how do you have these set and will it make a difference ? thankyou
MY NEW SETUP
Vestax PDX3000 X2
Vestax PMC 05 PRO 3
Q BERT THUDRUMBLE CONCORD NEEDLES
EDIROL FA 66
intel duo2core 6600@ 2.40GHz
1GB of ram
User avatar
mydogrizla
 
Posts: 172
Joined: 19 Feb 2006, 16:30
Location: NORTH EAST ENGLAND


Re: edirol fa 66 users ?

Postby UncleVibes on 23 Jun 2008, 13:00

I don't have to use the front plugs I got more on the back than what you have.
Maybe the potentiometer on the front do have some actions. What I don't understand is your diaphony but you have 100% codes received. Maybe you overload sometimes and saturate... Maybe the driver isn't fit well?
UncleVibes
 
Posts: 10254
Joined: 22 Sep 2003, 14:36


Re: edirol fa 66 users ?

Postby mydogrizla on 23 Jun 2008, 13:04

i really dont know what else i can try ? hopefully the dev team will come up with a answer ? :cry:
MY NEW SETUP
Vestax PDX3000 X2
Vestax PMC 05 PRO 3
Q BERT THUDRUMBLE CONCORD NEEDLES
EDIROL FA 66
intel duo2core 6600@ 2.40GHz
1GB of ram
User avatar
mydogrizla
 
Posts: 172
Joined: 19 Feb 2006, 16:30
Location: NORTH EAST ENGLAND


PreviousNext

Return to Technical support




Who is online

Users browsing this forum: No registered users and 22 guests

Board index

 
 
   
 
© 2014 Mixvibes