[TUTO] DVS pack Mk2 Video tutorial

[polocorp]

Windows XP users please follow these instructions to install your DVS pack Mk2 :

http://www.youtube.com/v/AXN-KC2y6Sk&rel=1

FULLSCREEN

WIndows Vista users, please follow the same instruction except for the drivers for the driver installation please refer to this thread :

u46mk2-drivers-and-installation-vista-t8560.html

[DJ Vue]

i did everything in the video. set up the program and all but i cant controll the Cross fader or the volume threw my mixer. Whats wrong??

[polocorp]

youre probably not using the latest update of the software and the old version of the ESI 1.0.16 driver.

Go to the [Options>Sound] pannel and make sure the device number in ASIO section is set to 2 or more.

Then, on the main screen chekc that your second player is set to the second output. you can change the output device number by clicking on it. Thsi number is usually placed in the uper left corner, but it varies depending on the skin you are using.

[the disfuse]

i have the same problem. I followed evry step of the instructions video but mixvibes simply does not work like it should.
these are the problems;
Inputs work but left and right output go threw the same exit! Althouw i installed the latest updates and I ve set the options right! ( It is set left to output 1/2 and right to 3/) just like in the video. It's a very strange thing to see because when i open the volume of the channel i can hear both tt's. When i open the other channel i can hear the sound of the needle against the vyill but no sound!. My mixer works (its a beat pro 4 mk2) my tt's work so what is wrong?
thanks

[henryNL]

I did everything the same way as the video setup instrucrtion, however I hear the sound of both turntable sounds on one channel??

Can anyone help me out?

thx
henry
BTW I'm using;
Windows Vista
Mixvibes DVS
1 x Numark DM3001X
2 x Gemini PT2400
1 x U46MK2

[g funk]

I'm also having the same issue here. Evything is setupt right, but I'm getting the signal from both tts through one channel. I've included my config report. Hope someone can help me out.

Config Report:

Config 2008/01/19 08:59

OS=Microsoft VISTA build=6000 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
MixVibes DVS version=6.394 DLL langage=US version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=0
Windows Moveable=No
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No
Noise=No Vol=0 Crakle=No Vol=0 Back Mute=No Scratch Sensibilty=0

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MIXVIBES U46MK2 ASIO AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:U46DJ 1/2 2-R:U46DJ 1/2
3-L:U46DJ 3/4 4-R:U46DJ 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:U46DJ 1/2-R:U46DJ 1/2
Mode=Absolute
Riaa=Yes Preamp Left=3 db Preamp Right=3 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=98.613 Volume max left=0.347 Volume max right=0.379 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=1.001 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:U46DJ 3/4-R:U46DJ 3/4
Mode=Absolute
Riaa=Yes Preamp Left=7 db Preamp Right=3 db Noise Filter=0
45T=No InverseLR=No PhaseInv=Yes
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.391 Volume max right=0.380 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=1.000 Speed Average(3s)=1.000

[the disfuse]

i had the same problem but the solution is very simple:p
When u open mixvibes and play two songs you will drag them into the two player. On top of each player (depending on skin) you'll see a headphone drawing(monitor) next to this is a number. This is the number of your exit simply press on the number of the second player and change it to 2. Problem solved!