Gemini G4V

[FigDJ]

Ok lets delete all the previous vu meter LED commands and insert the following code.

This is only for player A.
Players B, C, and follow parameter 15,16, 17

Code: Select all

        <mapping>
          <control alias="fam(Mixer).ChannelAMeter" value="%"/>
          <MIDI simpleMap="true"/>
          <MIDI type="cc" parameter="0x14" channel="0x3" value="0"/>
          <MIDI type="cc" parameter="0x14" channel="0x3" value="1"/>
          <MIDI type="cc" parameter="0x14" channel="0x3" value="2"/>
          <MIDI type="cc" parameter="0x14" channel="0x3" value="3"/>
          <MIDI type="cc" parameter="0x14" channel="0x3" value="4"/>
          <MIDI type="cc" parameter="0x14" channel="0x3" value="5"/>
        </mapping>

[sfronti]

Test it but no vu leds again.

Stelios, Greece

G4V FIG.mappings

(73.59 KiB) Downloaded 973 times

[FigDJ]

G4V FIG.mappings

(73.59 KiB) Downloaded 964 times

Test it but no vu leds again.

Stelios, Greece

The attachment G4V FIG.mappings is no longer available

I just realized that I read the spreadsheet incorrectly and made vu meter led commands go to channel 3 when they should go to channel 4. I made the changes in the attached file. Please give it a try.

[sfronti]

You made it!!! It's working, vu leds in DeckA are working!!!

Stelios

[sfronti]

I made the same for the other 3 decks!!!! Thanks a lot!!
How can i make the same for master vu leds?

Stelios

[sfronti]

Ok, no problem found it out, combined with a previous post from you!!!

Stelios

[FigDJ]

Ok, no problem found it out, combined with a previous post from you!!!

Stelios

Ok, Please post your latest map. I will take that as a start for other functions.

[sfronti]

[

I just realized that I read the spreadsheet incorrectly and made vu meter led commands go to channel 3 when they should go to channel 4. I made the changes in the attached file. Please give it a try.

The spreadsheet gives the command to go to MIDI channel 3. How did you find that is channel 4 and fix the problem??

A big big thank you for your help!!!!

[sfronti]

Here is the latest map

Thanks a lot!!!

Stelios

G4V FIG.mappings

(76.98 KiB) Downloaded 972 times

[FigDJ]

G4V FIGT1.mappings

(91.87 KiB) Downloaded 963 times

Stelios

Wonder if you can help me experiment a little to make a full map of the G4V.
1st load the map provided.
Load deck A and deck B using different tracks.
Using the GUI make Player B the MASTER

Press Shift + LOAD A
Does the track in Deck A becomes the same as in Deck B?

Load two new track on deck A and B

Make B the MASTER

Press Shif+SYNC on the left side.
Does Deck A now becomes the MASTER?