hi everyone

[youngy]

i dont have a phone preamp switch on the U-Mix44

[youngy]

also if i connect to line in i dont get sound only get sound though the phono input on my mixer and i know the line in works coz i used to use cd decks though it software works perfect timecodes stay in time like a dream its just the sound quilty its very poor

[youngy]

configer report here

Config 2013/01/13 11:19

OS= build=7600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=24 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=Yes Preamp Left=21 db Preamp Right=18 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.633 Volume max right=0.633 Volume optimum=0.370
Speed Average(100ms)=0.998 Speed Average(1s)=0.998 Speed Average(3s)=0.998


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=Yes Preamp Left=31 db Preamp Right=22 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.661 Volume max right=0.661 Volume optimum=0.370
Speed Average(100ms)=1.009 Speed Average(1s)=1.008 Speed Average(3s)=1.009


Vinyl 3 not connected
Vinyl 4 not connected

[youngy]

hi there i would like to say thanks i have sorted it out all my fault had it in phono and not line i just needed to turn up the volume thanks and will post my new radio show for you all many thanks i will now enjoy spining new tunes on my technics

[KevMaverick]

Good to hear that you got it sorted. Best of luck!

[wazza]

Good news....I new that you had it in the phono inputs on your mixer and not the line inputs....and was over amp your outputs

Don't feel bad ..it's a common mistake lots off Mixvibes new- bee make

[sly1300]

yep,

i did the same thing too..

headscratched for 5 mins then actually read the manual.

problem sorted

[daniel clark]

another happy customer ,,manuals are a good thing