Trouble with cueing with headphones !!!

[symphonix32]

I have Asio and a 5.1 external sound card but i still can't cue!! help would be much appreciated!

[daniel clark]

what sc ,, can you post a screen shot of your audio set up in perference,,,

first please regerster your software on the fourm ,, user control panel /profile,,

please no double postings ,will delete your dupliciate,
and welcome to mixvibes

[dmmp_junk]

I cant get my headphones to cue either. I have downloaded ASOI4All and have a USB sound card (Blaster x-Fi Go! Pro). I can get sound coming from computer speakers or headphones but not both.

My software has been registered. And I have been messing with this for three days.

[Marxon]

Welcome to our community dmmp_junk!

My software has been registered. And I have been messing with this for three days.

Like Daniel said, you have to register your software in the forum, too.
Please go into the User control panel -> edit your profil and enter your serial there. If all is correct you will get a icon of your software under your avatar picture. Like Daniel and me.

Best regards
Marxon

[dmmp_junk]

I still havnt been able to get my headphones working. Any suggestions?

[daniel clark]

a screen shot of your audio set in perferences will help give a little bit more info,,,
are you useing asio4all ,info as to your sc setup ,,,

info info

[KevMaverick]

This is getting to be a common problem it seems.

I have a little checklist that might help:

1. Whatever soundcard you're using, should have some sort of software configuration. Make sure that it is set to output multiple channels - not just stereo.

2. When that's done, check Asio4all to see if it is using those channels correctly - that took me a while to figure out.

3. Check the setting within Cross - if the 2 things above are correct, setting up Cross should be easy.

If more help is needed, screenshots would be great to help us sort the problem out.

Best of luck!

[dmmp_junk]

Below is how I set it up with no luck, I have attached a file with my current settings.

Please help.

Cue Headphones.docx

Also, I have no idea but everytime I open Mixvibes it ask me for my Liscense Key, is there any way to save this info?

[KevMaverick]

Right - firstly, I don't know what's causing the license key error, someone else may be able to help with that.

Now with the soundcard issue, it seems like you are using a different soundcard for the master and the cue. I had too many problems with that, so what I did was use the one multi-channel soundcard, and assigned the outputs to the different channels on that card.

I'm pretty sure that I had master on channel 1/2 and cue on 5/6.

I've found the specifications of your Blaster X-Fi card, and it should easily handle it.

[dmmp_junk]

I still cant get this thing to work. Frustrating.

Could you please send a screen shot of an example of how the settings should look.

I either get all the sound out of my speakers or out of my headphones but not both.