Board index ‹ Archives technical forum 2008 - 2013 ‹ MixVibes 7 ‹ MixVibes 7 support

Setup/Timecode Issue - U-Mix44

   Report the issues you noticed while using MixVibes.
Forum rules
* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to be sure your problem hasn't been solved already
* Write in concise and precise ENGLISH Thank you.
Post a reply

Setup/Timecode Issue - U-Mix44

Postby Gizmogibbo on 28 Dec 2011, 14:57

Hi There,

Apologies for this being my first post. I've searched other threads to see if somebody elses problem matched mine but cant seem to find the exact issue.

Im new to Mixvibes and digital DJ'ing as a whole.

I have installed the software, also downloaded the updates. I have been into the sound settings to make sure they are all set to 100%

The Vinyl decks are plugged into 1 & 2 of the Input U-Mix44 and the output is going into my Mixer.

When I go to 'install wizard' it gets to the vinyl part and says that they are not calibrated properly. When I go to setting and try and calibrate the timecode is at 0%.

Vinyl 2 is not plugged in as Im sorting the settings for one before transferring over the setting etc.

Any help is greatly appreciated!

EDIT: Not sure if this helps but there a little lights on the U-Mix44 sound card, only the 'USB' one is lit the others dont come on.

Config Report:
Config 2011/12/28 12:14

OS= build=7600 processor=PROCESSOR_IDENTIFIER=x86 Family 17 Model 3 Stepping 1, AuthenticAMD
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1-Not Connected 1 2-Not Connected 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:Not Connected 1-Not Connected 2
Mode=absolute
Riaa=Yes Preamp Left=35 db Preamp Right=34 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-28.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected
Gizmogibbo
 
Posts: 12
Joined: 27 Dec 2011, 18:29
Top

Re: Setup/Timecode Issue - U-Mix44

Postby christiankoopmann on 28 Dec 2011, 15:15

hey,

is the turntable running when you calibrat the system? it looks also that your U-Mix44 is not installed correctly because it says that your one configured output is not connected?

regards
Christian
Image
Image
February 2012 Mixvibes DJ of the Month
DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
christiankoopmann
 
Posts: 1823
Joined: 19 Dec 2008, 16:44
Location: Paderborn, Germany
Top

Re: Setup/Timecode Issue - U-Mix44

Postby Gizmogibbo on 28 Dec 2011, 15:40

Hi Christian, thanks for your reply.

Restarted the laptop and made sure everything was in the right place and its detecting it now but still only a timecode of 86% MAX

New config..

Config Report:
Config 2011/12/28 13:40

OS= build=7600 processor=PROCESSOR_IDENTIFIER=x86 Family 17 Model 3 Stepping 1, AuthenticAMD
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 1

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=23 db Preamp Right=23 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=178049 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=64.608 Volume max left=0.758 Volume max right=0.758 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected
Gizmogibbo
 
Posts: 12
Joined: 27 Dec 2011, 18:29
Top

Re: Setup/Timecode Issue - U-Mix44

Postby christiankoopmann on 28 Dec 2011, 15:45

hey,

enable the phono preamp at DVS (called RIAA or PHONO there) and calibrate again while playing the vinyl.
After that give me the % value or an config report

regards
Christian
Image
Image
February 2012 Mixvibes DJ of the Month
DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
christiankoopmann
 
Posts: 1823
Joined: 19 Dec 2008, 16:44
Location: Paderborn, Germany
Top

Re: Setup/Timecode Issue - U-Mix44

Postby Gizmogibbo on 28 Dec 2011, 16:09

Slightly better on the timecode = 85%MAX

The output coming from the soundcard is very distorted to the point where you can even make out the track.

Config Report:
Config 2011/12/28 14:08

OS= build=7600 processor=PROCESSOR_IDENTIFIER=x86 Family 17 Model 3 Stepping 1, AuthenticAMD
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=Yes Preamp Left=21 db Preamp Right=20 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=28805 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=86.899 Volume max left=0.707 Volume max right=0.707 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected
Gizmogibbo
 
Posts: 12
Joined: 27 Dec 2011, 18:29
Top

Re: Setup/Timecode Issue - U-Mix44

Postby christiankoopmann on 28 Dec 2011, 16:48

Gizmogibbo wrote:Riaa=Yes Preamp Left=21 db Preamp Right=20 db Noise Filter=0 Hz


the preamp is a bit high or is your turntable silent? how looks your timecode signal in the little box below at the vinyl section under preferences from DVS? can you see (depends on the settings a circle or two sinus curves)?

how sounds the sound from the turntable when you press bypass at DVS?

regards
Christian
Image
Image
February 2012 Mixvibes DJ of the Month
DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)

MEMBER OF:
:cool: c00l People MV Society :cool:
User avatar
christiankoopmann
 
Posts: 1823
Joined: 19 Dec 2008, 16:44
Location: Paderborn, Germany
Top

Re: Setup/Timecode Issue - U-Mix44

Postby Support@MixVibes on 28 Dec 2011, 17:52

Mixer should be in Line and not phono.
User avatar
Support@MixVibes
 
Top

Re: Setup/Timecode Issue - U-Mix44

Postby Gizmogibbo on 28 Dec 2011, 20:26

christiankoopmann wrote:
Gizmogibbo wrote:Riaa=Yes Preamp Left=21 db Preamp Right=20 db Noise Filter=0 Hz


the preamp is a bit high or is your turntable silent? how looks your timecode signal in the little box below at the vinyl section under preferences from DVS? can you see (depends on the settings a circle or two sinus curves)?

how sounds the sound from the turntable when you press bypass at DVS?

regards
Christian


I get two curves that follow each other

How can I adjust the preamp?

When I press bypass it just unloads the track..

Support@MixVibes wrote:Mixer should be in Line and not phono.


How can I correct this?
Gizmogibbo
 
Posts: 12
Joined: 27 Dec 2011, 18:29
Top

Re: Setup/Timecode Issue - U-Mix44

Postby Support@MixVibes on 29 Dec 2011, 12:09

Your hardware (IRL) mixer should accept the sound from the soundcard on line inputs, like a cd player, not phono ones.

Your settings should be like the player 2 in my picture for both of your deck :
U44_2.jpg


and also check volumes into Windows :

u44_w7.JPG


u44_volume.JPG
You do not have the required permissions to view the files attached to this post.
User avatar
Support@MixVibes
 
Top

Re: Setup/Timecode Issue - U-Mix44

Postby Gizmogibbo on 03 Jan 2012, 01:08

Thank you guys for all the support, think I'm almost there, have 99%\100% on the timecode.

Just having a slight issue with output now. The sound plays but every now and again it stutters, even when I use the bypass function (using vinyl)

It seems to happen whatever program I use ie media player etc so I gather it must be an issue with the U-Mix44 software.

I've updated all the software from the forum.

Can anyone shed an light?
Gizmogibbo
 
Posts: 12
Joined: 27 Dec 2011, 18:29
Top
Next
Post a reply

Return to MixVibes 7 support




Who is online

Users browsing this forum: No registered users and 15 guests

It is currently 28 Jun 2025, 18:23

Board index
 
 
   
 
© 2014 Mixvibes
  
cron