MixVibes Producer 7.4 and U46Mk2 please help !

[Tomaz94]

No, I don't see. It's only red, flat line.
I connect turntable to input 1/2.
3/4 is not connected.

[christiankoopmann]

Hmm. OK.

Let us try the following options:
1. set the input volume at the control panel from the asio driver to 1%.
2. Check if you can see something in DVS when playing vinyl and press calibrate if it works than.
3. If NOT go to the panel again and increase the volume to 3% and go to Step 2. This as long as you cant calibrate up to 100% input value.

But first you have not answered my question about how you connected the turntable with the soundcard and the soundcard with your mixer.
Give me please there a little description like: turntable -> input 1 of the soundcard -> output 1 to the mixer LINE in.

regards
Christian

[Tomaz94]

i'm connect:

Turntable->Input 1 (phono in u46k2)->output 1 (u46mk2)->Mixer line in

I do it in the evening, because I must go. Thank you, I do it and write here a few hours. If you can, check this post later. Thanks !

[Tomaz94]

OK, I did what you said, and nothing.

My connect:
Turntalbe -> input 1 soundcard (Phono) -> Output 1 soundcard -> LINE In (mixer)

Drivers:


http://img844.imageshack.us/img844/5250/drivera.jpg

Latency - 256
SampleRate - 44100Hz
BufferNumber - 2

Soundcard:


http://img3.imageshack.us/img3/4548/confm.jpg

Vinyl:


http://img16.imageshack.us/img16/3361/vinylc.jpg

I don't know. I connect anything right (I think). I set everything like as in instruction and MixVibes 7.4 doesn't see signal..

[daniel clark]

not familiar with the DVS sc set up,have you tried lowering the inputs levels as chris suggested,,just curious ,if you have figured out how to play the one turntable in pass thru mode just to see if the turntable is not at fault for some reason the software is not see the proper time code signal untill some one with DVS experience see this posting and can help you, all i can offer is blind suggestions and the suggestion that information in prior postings (in the mixvibes 7 DVS ) might give a clue and some futher info,and maybe some insight.if you check the product page you can navigate to video that might give some help also, also faq and tech manuals wish i could be of more help

[Blackbrook]

Hello,

sorry to disappoint you, but if your processor is this one

Intel Core i5 CPU 680 @ 3.60GHz

then you might get into huge problems - you already are if you are asking me. Your U46MKII audio interface is a device using USB 1.1. These older USB 1.1 devices have HUGE problems with the new Intel i-Core processors. This is very well known by Microsoft, every audio interface developer and vendor and by software companies like Mixvibes, NI or Serato. The problem is that neither the hardware developers nor the software companies can do anything to solve this problem. Just Microsoft can fix this, but they have no motivation to do so obsviously.
A friend of mine had exactly the same issue than you have. He could hear everything that was routing through the software (real records) but the timecode was not recognized. The solution is that you get yourself a USB 2.0 audio interface. Besides all NI Audio interfaces I highly recommend the Hercules DJ Trim 4&6. I have installed and configured this one at my friend's i-Core and it ran flawlessly from the beginning.

Sorry to say so, but you seem to be another one with this problem.

Cheers,

Steve

[Jim B]

Moved Thread

[Tomaz94]

OK, it's already running. when installing the drivers, we need to disconnect the mouse, etc. This was the problem, is already running. Thanks for help !

[Blackbrook]

when installing the drivers, we need to disconnect the mouse, etc.

[christiankoopmann]

This Sounds like the USB ports have not enough power...