I need step by step help in config of my mixvibes DVS

[RoSick]

I have never used such a software before, and I need total help.
Thank's

[daniel clark]

need a little bit more info on your comp,sc , hardware and any thing that might give us a clue as to what you are working with and want you want to accomplish check the fourm for manuals and the start up guide for basis info,

[RoSick]

I've added info about my system to my profile.

[daniel clark]

Offtopic.HorsSujet!

in the siginture section of the user profile you can publish that info so it more viewable to all on the posting

have you made any attemps a configuring your setup , have you gotten access to any manuals or start up guides
i could ask a thousand questions but lack of info would make that futile give us a starting point,

[RoSick]

My configuration report:


Config 2011/12/01 13:52

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 15 Stepping 10, GenuineIntel
MixVibes DVS version=7.304 DLL langage=US version=7.300

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

[daniel clark]

good starting point, not familiar with the DVS set up and config report,,,looks like if you are using tt they havent been calibrated,,

[Support@MixVibes]

http://www.mixvibes.com/sites/default/f ... _guide.pdf

[RoSick]

I can play, and control music from my one deck (Channel 3 on mixer), but if i play from both decks (channels 3 and 4), i can hear music from channel 4 even if the fader is on channel 3.

[RoSick]

http://www.mixvibes.com/sites/default/files/support/files/DVS_ULTIMATE_7.4_quick_start_guide.pdf

This guide is useless for me. Its says about channels in and out 1,2,3,4 but there is only in 1,2 L,R and out 1,2 L,R.

[RoSick]

:cool: good starting point, not familiar with the DVS set up and config report,,,looks like if you are using tt they havent been calibrated,,

No, they havent, and I dont know how to do it. The manual guide is not good enough for me. It's to professional.