Hi all :)

[Loopkidd]

Just to say hi to everyone. Am already gutted about this cos the U-Mix44 aint pickin up timecode vinyl. I'm gettin all other sound from system and i've maxed the vol. meters in control panel. Have used numerous other devices eg. Traktor, Torq, serato..etc. and never had this prob. WTF is goin on with Mixvibes?? Oh and yes, i am runnin 64bit windows 7 but have updated drivers. Any ideas peeps?
Cheers
CT

[christiankoopmann]

Hey,

welcome to the community and could you please post an config report while both players (i think you have turntables) are playing? it is important that both are running so we can see at the config report how the quality of the input signal is.

regards
Christian

[Loopkidd]

Ok how do i get the config report? There is no signal from the decks at all! not even from normal vinyl.

[christiankoopmann]

You are not getting sound from the turntables? are they right connected?
The turntables to the input of the soundcard and the outputs to the line in of the mixer.

To the config report. Start the program DVS. start both players playing and then go option -> create config-report. Copy the report and post it here.

regards
Christian

[Loopkidd]

Yep all connections are correct as far as i can see. heres the report:-
Config 2011/09/22 15:51

OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 37 Stepping 5, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=Yes History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

Thanx

[christiankoopmann]

Hey,

I'm not the specialist with the U-Mix44 but when the turntables are phono outputs you have to set the inputs at DVS to phono.
And check at the volume control panel the volume, maybe it is very silent setted after startup?

regards
Christian

[Loopkidd]

Thanx for ur help mate but this aint workin. No matter what settings are applied it just aint right. No other system has this issue so im sendin it back and goin for something else. Very dissapointed as i needed it for a gig 2morro.

Regards
Craig