MIXVIBES 7 DVS U-Mix PACK

[nxenos]

hi all! i'm new with this kind of stuff/ i usually played with the classical way! audio cd's, or mp3 cd's :-)
but now i tryed to play with my new mixvibes 7 DVS U-Mix, but i only can play with start/que buttons! i cant start and stop or make a search inside a track!it's not calibrate or synchronize with the time code cd's and i havent any message during the installation progress! i have vista 3g ram and 2 Pioneer cdj 200 with a 4 channel Vestax mixer. i've checked the connections the drivers is ok, te connections is ok. i;m sure about that cause i hear sound and the channels are correct! my only problem is that i can manage the tracks only with the start/start-que button! any healp pls??

[Blackbrook]

Forumrules
PLEASE.READ.FORUM.RULES.SUPPORT.UPDATE


* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to be sure your problem hasn't been solved already
* Write in concise and precise ENGLISH Thank you.

[UncleVibes]

By the way hello and follow as said by blackbrook the common rules of this forum. Support is only for registred members with a valid serial. Come back!

[Jeanne thierry]

Hey . hello , could you help me please . everything works
except when i try to calibrate , after 2 hours of waiting , i dont have any message about the calibrate , and i only can play cue with my players .
i followed all the instruction but it doesn't work . excuse me for my english ( I'm french ) .

[daniel clark]

welcome to mixvibes not too familiar with the program, one of the useful tools is to post a config report on the fourm ,gives a little bit more info as to what is going on with the software if english is not to familiar then you can post either on the freanch topic area or use french in your posting here hate too ask for double typing but any info posted that cant be understood will be handicaped to thoes of us that are not multi lingual again welcome

[Jeanne thierry]

hello thank you for your reply ! I to post it in french as you wanted, i hope you 'll understand .

Je possèdes des numarks ndx200 ( platines cd ) et la U-Mix a bien été mise en place , led allumé pour les inputs etc ,pitch a 0 , etc .

Et ca fais depuis hier que j'essaye de calibrer mais je recois aucun message pour me dire que le cablibrage a été réussi
j'arrive a voir que sur l'onglet option/ entrée vinyle,cd : que la qualité du timecode est a 100%.

My configuration when i put STOP :


Config 2011/12/30 14:44

OS=Microsoft VISTA Service Pack 2 build=6002 processor=PROCESSOR_IDENTIFIER=x86 Family 17 Model 3 Stepping 1, AuthenticAMD
MixVibes DVS version=7.400 DLL langage=FR version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=No AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=relative time
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=relative time
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

And my config when i put play :


Config 2011/12/30 14:45

OS=Microsoft VISTA Service Pack 2 build=6002 processor=PROCESSOR_IDENTIFIER=x86 Family 17 Model 3 Stepping 1, AuthenticAMD
MixVibes DVS version=7.400 DLL langage=FR version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=No AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=relative time
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.718 Volume max right=0.629 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=CD
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=relative time
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=100.000 Volume max left=0.724 Volume max right=0.709 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl 3 not connected
Vinyl 4 not connected

and i when i put play with the ' relative time mode ' in DVS , i can search the track on my PC .

So is there any problem ?
or everything is good even if i didn't receive the message that the calibration was successful ?

Hope you could help me .

[christiankoopmann]

The feedback that the calubration successful is when you see round 100%. You can see it in the GUI on every player.

So it looks all perfect so it should work flawles.

regards
Christian

[Jeanne thierry]

thank youu for your help