Hello... problem with mixvibes DVS Ultimate

[Hannes]

these infos are included in the config report extracted from DVS

but not the cpu-type afaik?!? I´d bet 5$ it´s cpu related

[UncleVibes]

but not the cpu-type afaik?!?

yes it is included but in coded words

this is for example my config report:

Config Report:

Config 2011/05/24 12:12

OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
MixVibes PRO version=6.394 DLL langage=FR version=6.290

System Setting
--------------------
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Moveable=No
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=140
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No
Noise=No Vol=0 Crakle=No Vol=0 Back Mute=No Scratch Sensibilty=0

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=EDIROL FA-101 AsioVersion=0 DriverVersion=1291
Latency=6 Driver sampling=44100 Nb Input=10 Nb Output=10
Managment Type ASIO
1-LineOut 3&4 left 2-LineOut 3&4 right
3-LineOut 5&6 left 4-LineOut 5&6 right

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=4:LineIn 5&6 left-LineIn 5&6 right
Mode=Absolute
Riaa=No Preamp Left=47 db Preamp Right=46 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:LineIn 3&4 left-LineIn 3&4 right
Mode=Absolute
Riaa=No Preamp Left=47 db Preamp Right=47 db Noise Filter=0
45T=No InverseLR=No PhaseInv=No
Offset=0 ms
Noise Level=-40.000 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

first lines are the type of processor than which mixvibes version... Yes I know I can do some updates as I use here PRO6!

[Hannes]

it´s an Intel....but that´s all i can read fom it^^
Maybe a series 6 chipset?

[mikedrive]

Config Report:

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=5342003225101852800000000000000.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=5342003225101852800000000000000.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

[UncleVibes]

it says that if your proccessor ID in your System Variable says x86 then it runs as a 32bit processor.

"x86 Family 6 Model 15 Stepping 6, GenuineIntel" I got an Intel Core 2 6400.

Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz [Family 6 Model 23 Stepping 10]


Tryu your sond card in 48khz mode instead of 44.1khz as you run in 64 bits

[mikedrive]

it is already at 48 the problem tha i have is that the players are playing kai the cds and the mixer is correctly install but the problem is othe setup when is time to set up the cd calibration i do everything that the manual says and i dont calibrate the cds the timecode is always on 0%

[UncleVibes]

do you see the input in the cd/vinyl preferences? publish a picture of these options your system running

[mikedrive]

MIXVIBES.jpg

[mikedrive]

maybe i have to download the drivers for 64 bit is there possible not to have the correct drivers and not work properly and where can i find them

[UncleVibes]

drivers are in the download section. I can't see any inputs on the picture if your are using cd...