Weird problem [Solved]

[Blackbrook]

Hey guys,

I am helping a friend with his DVS. So we have the problem that it does not work - the timecode is not recognized by the software. I have completely reinstalled DVS and the audio device three times to different locations, deleted registry settings and all the stuff we are always suggesting users.
Finally it does not work The weird problem is that if I click on bypass, we can hear the timecode, it is routed through all soft - and hardware to the mixer. Deactivating Bypass and trying to calibrate does not change anything. I am totally out of ideas!!!!!
We have tried the Cross demo and also virtual DJ without success.

We will post a config report!

Thanks for all hints, tips and tricks!

Cheers,

Steve

[Hannes]

HI Steve,

which Carts and Turntables is your friend using?

cheers
Hannes

[praefix]

Hey guys,
this is my config report. I hope you have an idea.

Code: Select all

Config 2011/05/20 19:39

OS=  build=7600  processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 42 Stepping 7, GenuineIntel
MixVibes DVS version=7.400  DLL langage=DE version=7.400

System Setting
--------------------
Load in Ram  Channel1= Yes  Channel2= Yes 
Load memory time limit=13  Load time=normal
Low gui priority=Yes   Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2  Nb Samples=16
Windows Caption=No  Theme=3
TAG V1=Yes   TAG V2=No

Mix Setting
--------------------
AutoCue=Yes  AutoGain=Yes  AutoBpm at Load=Yes
Display Pitch=Yes  Auto Match at load=No
Bpm Range min=78  max=150
Loop in bar boundaries=Yes  Security=No  History=Yes
Compressor=No  Limiter=No

Sound Configuration
--------------------
Nb Sound=3  Nb Mixer=0
Managment Type ASIO
Device=ASIO 2.0 - ESI U46  AsioVersion=0  DriverVersion=2
Latency=6  Driver sampling=44100   Nb Input=4  Nb Output=6
Managment Type ASIO
 1-L:ESI U46 ASIO DRIVER 1/2  2-R:ESI U46 ASIO DRIVER 1/2
 3-L:ESI U46 ASIO DRIVER 3/4  4-R:ESI U46 ASIO DRIVER 3/4
 5-L:ESI U46 ASIO DRIVER 5/6  6-R:ESI U46 ASIO DRIVER 5/6

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:ESI U46 ASIO DRIVER 1/2-R:ESI U46 ASIO DRIVER 1/2
Mode=absolute
Riaa=No  Preamp Left=0 db  Preamp Right=0 db Noise Filter=0 Hz
45T=Yes  InverseLR=No   PhaseInv=No
Decalage=0 ms  Time limit=720000 ms
Silence seuil=-40.000 db  SNR=40 db

Config Bypass Riaa=No  Preamp=0 db Noise Filter=0 Hz  Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500   Volume max left=0.000  Volume max right=0.000   Volume optimum=0.370
Speed Average(100ms)=0.000  Speed Average(1s)=0.000  Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:ESI U46 ASIO DRIVER 3/4-R:ESI U46 ASIO DRIVER 3/4
Mode=absolute
Riaa=No  Preamp Left=0 db  Preamp Right=0 db Noise Filter=0 Hz
45T=Yes  InverseLR=No   PhaseInv=No
Decalage=0 ms  Time limit=720000 ms
Silence seuil=-40.000 db  SNR=40 db

Config Bypass Riaa=No  Preamp=0 db Noise Filter=0 Hz  Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500   Volume max left=0.000  Volume max right=0.000   Volume optimum=0.370
Speed Average(100ms)=0.000  Speed Average(1s)=0.000  Speed Average(3s)=0.000


Vinyl3 connected=vinyl version 2
Audio=ASIO source=2:L:ESI U46 ASIO DRIVER 3/4-R:ESI U46 ASIO DRIVER 3/4
Mode=absolute
Riaa=No  Preamp Left=0 db  Preamp Right=0 db Noise Filter=0 Hz
45T=No  InverseLR=No   PhaseInv=No
Decalage=0 ms  Time limit=720000 ms
Silence seuil=-40.000 db  SNR=40 db

Config Bypass Riaa=No  Preamp=0 db Noise Filter=0 Hz  Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500   Volume max left=0.000  Volume max right=0.000   Volume optimum=0.370
Speed Average(100ms)=0.000  Speed Average(1s)=0.000  Speed Average(3s)=0.000


Vinyl4 connected=vinyl version 2
Audio=ASIO source=2:L:ESI U46 ASIO DRIVER 3/4-R:ESI U46 ASIO DRIVER 3/4
Mode=absolute
Riaa=No  Preamp Left=0 db  Preamp Right=0 db Noise Filter=0 Hz
45T=No  InverseLR=No   PhaseInv=No
Decalage=0 ms  Time limit=720000 ms
Silence seuil=-40.000 db  SNR=40 db

Config Bypass Riaa=No  Preamp=0 db Noise Filter=0 Hz  Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500   Volume max left=0.000  Volume max right=0.000   Volume optimum=0.370
Speed Average(100ms)=0.000  Speed Average(1s)=0.000  Speed Average(3s)=0.000




@j-kut I am using Reloop M3ds and Tonar Banana carts
Greetings From Paderborn

[christiankoopmann]

Hey,

I have a silly question but have you enabled Phone in DVS?

regards
Christian

[Hannes]

christian is right, the phono-preamp is disabled.
I´d also try different carts.

maybe it´s a problem with the u46 internal routing, a look in the panel might help

hard to tell via i-net....

[Blackbrook]

We have tried with Phono on and off - no timecode was recognized.

Changing carts is an option. We will try it!

Cheers and thanks,

Steve

btw.: we could switch to german, just germans in her :P

[Blackbrook]

maybe it´s a problem with the u46 internal routing, a look in the panel might help

What do you mean? In the panel the inputs are switched to phono and no matter at which volume level it does not change anything :-( Timecode is hearable when we connect the headphones to the phones output.

Cheers,

Steve

[Blackbrook]

I have a silly question but have you enabled Phone in DVS?

We've double checked it and switching on Phono is unfortunately no solution Thanks anyway!

Cheers,

Steve

[Hannes]

I was thinking check in the panel where it says "directwire"

btw. is it a sandy-brigde system? cause the u46 dont work on my new laptop too....

[Blackbrook]

btw. is it a sandy-brigde system? cause the u46 dont work on my new laptop too....

I can not believe it ... IT IS! So many problems using DVS ... first his USB bus was broken, then he got a new machine and now have a look at this... Oh damn!

I will borrow him my Hercules DJ Trim 4&6 for testing.

Thanks a lot for you help mates! I really appreciate that!

Cheers,

Steve