Problem again

[Sebas94]

SOLVED¡¡¡(by the moment) i conected the tt directly to mixer and i hear the piiiiiii, the i try to connect cdj to output 2, but and the waveform was ok but there was no sound and 0%, then i tried the tt with input 1(the output of the cdj, the one that was working ok) and there w 0% buas no sound andt there was a litle litle waveform, then on a second try the cdj on intput 2 worked but with a very low sound, and the tt on input 1 and there was ok but the pitch was very quickly (200 bpm, when the real song was 80 bpm) and at last i put all again in the place they used to be (input 1 with cdj and input 2 with tt) and as usual the cdj was working correctly but the tt not (plane line on the waveform) but i dont minded the plane line and i click on calibrate and surprise, surprise the tt start working again with a perfect waveform and 100% and cdj too¡, but the tt was too loud and the cdj too low, something i can do? and thanks for tips and tests.

[christiankoopmann]

Hey,

great but I don't understand where the problem now was^^

To the loudness of your inputs Support@MixVibes wrote in an other thread a solution to how you can increase and also decrease your input volume. viewtopic.php?f=268&t=19921
It is the 5. entry or so with a picture. Maybee this helps you with this problem.
And don't hesitate to ask other question when you have problems. We will do the best to help out with every question .

regards
Christian

[Support@MixVibes]

A turntable can't play louder than a cd deck.
Till now we don't know anything about your turntable...

[Sebas94]

my tt is an akiyama acura and my cdj a Numark axis 9, now ill see if your solutions of page 5 works, if not ill be here in some time again

[Support@MixVibes]

Seems like a standard turntable, nothing special on it.

[Sebas94]

the problem of the sound isnt solved, the thing is this: you know that sometimes the sound is too loud and the waveform of the cdj is very higher, so i have to get lower the sound on the preference control and then the waveform of the cdj gets on the normal way, ok, my problem is that every time i use mixvibes the waveform is too higher again so i need to get lower the volume, but the volume gets saved every day, mixvibes not, so now, i have the waveform of cdj too loud but the sound of the control panel on 0 so i cant do the same i have been doing till now, what i can do? and the other problem is that the sound of the tt is very very high, i cant use the headphones, and the sound is distorsioned because of the higher of the volume. what i cant do?

[christiankoopmann]

, i cant use the headphones, and the sound is distorsioned because of the higher of the volume. what i cant do?

To that I have a question: The sound comming out of the U-Mix? or the sound you grap off from your mixer? Wehn you using a external mixer in what have you plugged the outputs of the U-Mix? I ask because some people connected there outputs like when they using tts so in the phone in. But this is not correct because from the U-Mix there is comming a line signal so the phone would distorsiening every time.

i use mixvibes the waveform is too higher again so i need to get lower the volume, but the volume gets saved every day, mixvibes not, so now, i have the waveform of cdj too loud but the sound of the control panel on 0 so i cant do the same i have been doing till now,

Where did you set the volume? Because normaly it sould save it. What happans when you set it to max close mixvibes and open it again and setting it to maybee 50% ? is that working?
Maybee Support@MixVibes has a solution to that problem because I don't understand why it is not saved or where you setted the volume.

regards
Christian

[Support@MixVibes]

the problem of the sound isnt solved, the thing is this: you know that sometimes the sound is too loud and the waveform of the cdj is very higher, so i have to get lower the sound on the preference control and then the waveform of the cdj gets on the normal way, ok, my problem is that every time i use mixvibes the waveform is too higher again so i need to get lower the volume, but the volume gets saved every day, mixvibes not, so now, i have the waveform of cdj too loud but the sound of the control panel on 0 so i cant do the same i have been doing till now, what i can do?

I don't know how your are switching from TT to CD but you need to change the media type and do a calibration each time you change these settings.

and the other problem is that the sound of the tt is very very high,

I think you misunderstood me.
You need to set the volume inputs into Windows control panel, not into MixVibes.

u44_w7.JPG

See ? This is Windows, so if it doesn't saved your volume, your Windows is faulty.

As said a turntable can't have an higher output than a cd deck. The CD is arround 30 to 40dB louder than a turntable (hence the gain added by the software).

i cant use the headphones, and the sound is distorsioned because of the higher of the volume. what i cant do?

And this is a 3rd issue because you set the mixer in phono instead of line and this has nothing to do with the settings on the computer.