help!!!

[djnath]

in not 100% sure on how all the technical side of things need to be for the sound set, up can u please help!!!!!!!!! mixvibes is NOT performing how i think it should.... i think the sound setup must be wrong....... cheers




Config 2011/04/07 12:25

OS= build=7600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 2, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=3
TAG V1=Yes TAG V2=No

Mix Setting
--------------------
AutoCue=Yes AutoGain=No AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=ASIO 2.0 - ESI U46 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=6
Managment Type ASIO
1-L:ESI U46 ASIO DRIVER 1/2 2-R:ESI U46 ASIO DRIVER 1/2
3-L:ESI U46 ASIO DRIVER 3/4 4-R:ESI U46 ASIO DRIVER 3/4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:L:ESI U46 ASIO DRIVER 1/2-R:ESI U46 ASIO DRIVER 1/2
Mode=all relative
Riaa=Yes Preamp Left=3 db Preamp Right=3 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.651 Volume max right=0.651 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:L:ESI U46 ASIO DRIVER 3/4-R:ESI U46 ASIO DRIVER 3/4
Mode=all relative
Riaa=Yes Preamp Left=5 db Preamp Right=4 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.522 Volume max right=0.522 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[christiankoopmann]

Hey,

what exactly isn't working? Is there no sound comming out of your DVS / Soundcard to the mixer? or where is the problem.

The Config-Report looks normal. You have installed the ESI Asio Driver for the U46MK2. Why? is the MixVibes Driver not working? The newest Version of the MixVibes Driver you can download here:
downloads.php?cat=27

If you using 64Bit and also Win 7 then I recommend you to install the newest. But the ESI is also ok it sould work too^^.

When you don't know if your setup is correct please write a detailed description of what you where pluged in and so on. From the Report we can only see if the software is correct configurated.

regards
Christian

[Support@MixVibes]

MV7_gui.JPG

May be activate the vinyl mode ?