I Cant calibrate my cdj

[Sebas94]

Hi, i have just bought my mixvibes DVS and im runing it on a windows vista, i have configured and plucked all the inputs and outputs correctly (i supose) i have an akiyama acura and a Numark axis 9, the akiyama acura works perfectly on the mixvibes but yhe Numark axis 9 dont work on it, i donk know what to do, my vinil goes 100% and cdj 0%, i post ,my config report so you cant tell me if you see something wrong, thanks
Config 2011/03/11 19:09

OS=Microsoft VISTA Service Pack 1 build=6001 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 7, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=Yes Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=22 db Preamp Right=22 db Noise Filter=0 Hz
45T=Yes InverseLR=Yes PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=12.589 Volume max right=12.589 Volume optimum=0.370
Speed Average(100ms)=1.000 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=Yes Preamp Left=22 db Preamp Right=21 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=12853 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

[Blackbrook]

Forum rules
- Register your software (User Control Panel > Profile > Serial Number)

Try to decrease your audio interface's inputs. Nearly every CD player has a huge output volume so the timecode is "too loud" to be recognized correctly by the software.

Cheers,

Steve

[Sebas94]

ok, i think i have registered my software, if i didnt please, tell me how, and my problem, do you mean to decrease the volume on PC (control panel, mixvibes...etc) or on the u-mix44 sound card (monitor level) or do you refer to another thing?

[boc]

options > vinyl/cd input tab > adjust gain


i ve made a screenshot but cant find the upload btn for the picture :/

[Blackbrook]

options > vinyl/cd input tab > adjust gain

Yes, you can adjust it there or in your audio interface's control panel.

Cheers,

Steve

[Sebas94]

i tried what you said but its still doesnt work,it still the same

[Blackbrook]

Can you please make a screenshot of your audio preferences in DVS 7 with the timecodes playing on both decks and attach it in here or upload it at a image hoster and post the link here?

Thanks in advance!

Cheers,

Steve

[Sebas94]

actually i have tried again and now its 100% and during 1 or 2 hours it was working perfectly, but i get out and now when i have put it again its still on 100% but when i press play i dont start, ill try to put the screenshot

[Sebas94]

Hi again, i have made the screenshot, as you can see the calibration on cdj is 100% and the 2 or 3 first songs i play it works correctly, but on 0.30 or 1 hour, it still on 100% but it didnt reproduce anything, and another problem i have is that my vinil is on 96% and it works correctly but it takes a lot of time to start, i put the cartridge on the vinil, and it take some time to start, but apart from that it work correctly,
Thanks

[boc]

the screenshot is a bit too small to view it correctly...


edit: oops, my bad, its okay now. unfortunately, i have no idea which could lead to a solution of your problem