Problem with calibrate

[Support@MixVibes]

- do you have timecode input into the preferences/option/Vinyl-cd Input tab ?
- do you have sound output on the meters into View/Main volume ?
- what drivers are you using ?

[Korda]

1) No I don't have timecode input in Vinyl-cd tab.
There is a:
Type
Mode
Audio Interface
Audio input
Timecode quality (which is 0% all the time)
Adjust gain
phono input
45rpm
Left/Right
Phase inverse
Offset

2) No I don't have sound on Main volume meters

3) U46mk2 v3.0 xp vista_7
and this is a driver

[Support@MixVibes]

You need to have a signal input in the Vinyl-cd tab (the 2 black squares) to have timecode control and meters moving on the main volume to have sound outside the software.

For now your soundcard can't be used by the software.
Remove all ASIO drivers and try with the ESI or Asio4all :

http://download.esi-audio.com/download.asp?w=esi&ht=http://download.esi-audio.com/ESI/u46dj_v3_0.html&p=26&g=2&l=en&pr=U46DJ&te=driver%20and%20control%20panel&ve=3.0&si=2.496%20KB&da=2009-11-04&no=Rev.%20B&li=http://www.esi-audiotechnik.com/download/ESI/U46DJ/U46DJ-v3_0.zip&os=Windows%20XP%3Cbr%3EWindows%20Vista%2032-bit%3Cbr%3EWindows%20Vista%2064-bit%3Cbr%3EWindows%207%2032-bit%3Cbr%3EWindows%207%2064-bit%3Cbr%3E&fi=U46DJ-v3_0.zip

http://www.asio4all.com/

[Korda]

No. Still don't work and its a same problem. He don't see signal at all.
So, i was install MixVibes UPDATE DVS 7.218. with U46mk2 _v1.041 driver on my desktop PC with XP sp3 and everything work normaly, but my mixer stil don't react ( crossfader, faders, eq's.. nothing don't work), but when i control vinyls, everything from MixVibes I hear and it works ok.

This is config

Config 2011/01/07 16:48

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 6, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Channel
Device=Sound Blaster Audigy Latency=100

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=Sound Blaster Audigy source=
Mode=absolute
Riaa=Yes Preamp Left=8 db Preamp Right=7 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio= source=
Mode=absolute
Riaa=Yes Preamp Left=7 db Preamp Right=7 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

[Support@MixVibes]

Update to the latest RC and it should be ok.

[Korda]

Sorry, but what is RC?

[Blackbrook]

with U46mk2 _v1.041

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type Multi Channel
Device=Sound Blaster Audigy Latency=100

So you said that you are using a U46 MK II but in the sound preferences you configured DVS using the Sound Blaster Audigy!!!!!!

Please choose the U46 MK II in your audio preferences of DVS!

Greetings,

Steve

[Korda]

Still don't work on laptop with win7, but everything its ok with desktop with XP Sp3.
Exept one thing.

When i put some mp3 file, and i want to mark begining or from some part, he don't wan't to play from that mark. He just keep going forward.
But, when i put some shorter wav. file, everthing work normaly.

P.S. I am sorry guys to bugging you, but i'm just a begginer with MixVibes and i really need help. Thank you for your time and don't take it for bad.

[Blackbrook]

When i put some mp3 file, and i want to mark begining or from some part, he don't wan't to play from that mark. He just keep going forward.
But, when i put some shorter wav. file, everthing work normaly.

How do you want to "mark" this? As a cue point? If so you can create lots of loops and save 5 in the loop memory. Additionally you can use 6 locators that you can set and where you can jump to. Be aware that you play in relative mode! I recommend the "CARBON V2 DVS - Advanced - 1280" skin so that you can see everything!

P.S. I am sorry guys to bugging you, but i'm just a begginer with MixVibes and i really need help. Thank you for your time and don't take it for bad.

No problem, this is what we are here for!

Greetings,

Steve

[Korda]

I use "CARBON V2 DVS - Advanced - 1280" skin.
Yes, i mean locators.
When i put locator on some point in mp3. files (like song or random sounds in file) that song going, then when i pres, for example, locator 1, he don't wan't to start from that locator1 point, he just keep going.

But, in wav. files, everything is normaly and locators work properly.


And what is a relative mode?
Absolute, Rel Time or All rel?