Board index ‹ Archives technical forum 2008 - 2013 ‹ Technical support

help needed asap!!!! gig tomorrow

   Forum closed (read only)
Forum rules
PLEASE.READ.FORUM.RULES.SUPPORT.UPDATE


FORUM CLOSED PLEASE POST in NEW TECHNICAL FORUMS BY SOFTWARE FAMILY

* Register your software (User Control Panel > Profile > Serial Number)
* Go to the download center and install the latest versions of software and drivers
* Use the search tool to look into topics
* Check the FAQs to be sure your problem hasn't been solved already
* Write in concise and precise ENGLISH Thank you.
Post a reply

Re: help needed asap!!!! gig tomorrow

Postby djsupa on 10 Dec 2010, 14:29

config report:


Config 2010/12/10 12:24

OS= build=7022 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 22 Stepping 1, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34088960
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-Out 1 2-Out 2
3-Out 3 4-Out 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:In 1-In 2
Mode=all relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:In 3-In 4
Mode=all relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=0 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

pics attached as the software is at the moment!
You do not have the required permissions to view the files attached to this post.
djsupa
 
Posts: 43
Joined: 09 Jan 2009, 20:35
Top

Re: help needed asap!!!! gig tomorrow

Postby Support@MixVibes on 10 Dec 2010, 16:17

Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34088960

Something is wrong with your asio drivers.
User avatar
Support@MixVibes
 
Top

Re: help needed asap!!!! gig tomorrow

Postby djsupa on 10 Dec 2010, 16:18

i have downloaded and re-installed the latest version can u send me a link to a working one?
djsupa
 
Posts: 43
Joined: 09 Jan 2009, 20:35
Top

Re: help needed asap!!!! gig tomorrow

Postby djsupa on 10 Dec 2010, 17:07

this is config after re install of driver. any better?

Config 2010/12/10 15:06

OS= build=7022 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 22 Stepping 1, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34088960
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-Out 1 2-Out 2
3-Out 3 4-Out 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:In 1-In 2
Mode=all relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:In 3-In 4
Mode=all relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=0 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000
djsupa
 
Posts: 43
Joined: 09 Jan 2009, 20:35
Top

Re: help needed asap!!!! gig tomorrow

Postby Support@MixVibes on 10 Dec 2010, 17:23

downloads.php?cat=28
User avatar
Support@MixVibes
 
Top

Re: help needed asap!!!! gig tomorrow

Postby djsupa on 10 Dec 2010, 17:38

this is the config report after installing the drivers u just sent

Config 2010/12/10 15:37

OS= build=7022 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 22 Stepping 1, GenuineIntel
MixVibes DVS version=7.218 DLL langage=US version=7.210

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=Maya44 USBAudio ASIO driver AsioVersion=0 DriverVersion=34088960
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-Out 1 2-Out 2
3-Out 3 4-Out 4

Vinyl Configuration
--------------------
Vinyl1 connected=CD
Audio=ASIO source=0:In 1-In 2
Mode=all relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=CD
Audio=ASIO source=2:In 3-In 4
Mode=all relative
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=0 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.000 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.000
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000

any good?
djsupa
 
Posts: 43
Joined: 09 Jan 2009, 20:35
Top

Re: help needed asap!!!! gig tomorrow

Postby Psykadelik on 10 Dec 2010, 21:45

Can you give us a general run down of the equipment you are using and how everything is connected?
2 Stanton ST-150 + 2 Ortofon Concorde QBert + Vestax PMC-08Pro

ADK 1Q AR
Intel Corei7 620M 2.66 GHz
Windows 7 Home Premium 64-bit
4 GB DDR3 RAM
500 GB HD
512 MB ATI Radeon Graphics
Echo Audiofire8
Psykadelik
 
Posts: 180
Joined: 18 Sep 2008, 05:57
Location: Ontario, Canada
Top

Re: help needed asap!!!! gig tomorrow

Postby djsupa on 17 Dec 2010, 14:43

hi sorry for the late reply lost net for a while. anyway im useing mixvibes dvs7 on an acer aspire 5315. Pioneer cdj's into the mixer. i have the cdj's going into the maya44 usb soundcard with the outputs going into the mixer
djsupa
 
Posts: 43
Joined: 09 Jan 2009, 20:35
Top

Re: help needed asap!!!! gig tomorrow

Postby Support@MixVibes on 17 Dec 2010, 16:16

Try to set the level of the U44 into Windows :
umix_w7.JPG


Recording (inputs) shouldn't exceed 9 for CD players (mine is set@19)
Playback (ouputs) should be set to full level (100)
You do not have the required permissions to view the files attached to this post.
User avatar
Support@MixVibes
 
Top

Re: help needed asap!!!! gig tomorrow

Postby djsupa on 16 Jan 2011, 15:10

hi sorry for the late reply been ill :( anyway tried the last thing that was mentioned but still have the problem. is there anyone who can help?????? next gig from being ill is this friday the 21st HELP!!!!
djsupa
 
Posts: 43
Joined: 09 Jan 2009, 20:35
Top
PreviousNext
Post a reply

Return to Technical support




Who is online

Users browsing this forum: No registered users and 17 guests

It is currently 20 Jun 2025, 20:49

Board index
 
 
   
 
© 2014 Mixvibes