MIXVIBES Dj Community old forum

I have never used such a software before, and I need total help.
Thank's

need a little bit more info on your comp,sc , hardware and any thing that might give us a clue as to what you are working with and want you want to accomplish check the fourm for manuals and the start up guide for basis info,

I've added info about my system to my profile.

Offtopic.HorsSujet!

in the siginture section of the user profile you can publish that info so it more viewable to all on the posting

have you made any attemps a configuring your setup , have you gotten access to any manuals or start up guides
i could ask a thousand questions but lack of info would make that futile give us a starting point,

My configuration report:


Config 2011/12/01 13:52

OS= build=7600 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 15 Stepping 10, GenuineIntel
MixVibes DVS version=7.304 DLL langage=US version=7.300

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected

good starting point, not familiar with the DVS set up and config report,,,looks like if you are using tt they havent been calibrated,,

I can play, and control music from my one deck (Channel 3 on mixer), but if i play from both decks (channels 3 and 4), i can hear music from channel 4 even if the fader is on channel 3.

Support@MixVibes wrote:http://www.mixvibes.com/sites/default/files/support/files/DVS_ULTIMATE_7.4_quick_start_guide.pdf

This guide is useless for me. Its says about channels in and out 1,2,3,4 but there is only in 1,2 L,R and out 1,2 L,R.

daniel clark wrote::cool: good starting point, not familiar with the DVS set up and config report,,,looks like if you are using tt they havent been calibrated,,

No, they havent, and I dont know how to do it. The manual guide is not good enough for me. It's to professional.