Page 1 of 2

Installation

PostPosted: 27 Sep 2011, 01:31
by londonstyle
Hey I just bought the Mixvibes DVS Ultimate package and I am having some problems setting it up.It installed OK but when I tried to configure it.on step 4 of the install wizard it could not locate mu U-MIX- 44 for inputs and output set up.I have Protools installed and I don't know if that's the reason it won't allow me to select another device,but in the window it reads(Not Connected)If someone can walk me through this process I would greatly apprecieate it. I'm kind of frustrated at this point.
Thanks Guys,
B.J.

Re: Installation

PostPosted: 27 Sep 2011, 01:39
by daniel clark
:cool: :cool: welcome to mixvibes , dont have any clear info on DVS setup.,but will remind you to regerster your software to recieve the full benifit of the software. :cool: :cool: welcome again :cool:

Re: Installation

PostPosted: 27 Sep 2011, 10:48
by Blackbrook
Please do a complete Reinstallation of your audio interface including cleaning the registry with tools like CCleaner and install the driver afterwards to a completely different location i.e. was it formerly installed to C:\program files\Mixvibes\ install it to C:\program files\Audio\Mixvibes

Cheers

Re: Installation

PostPosted: 28 Sep 2011, 01:13
by londonstyle
I tried re-installing Mixvibes DVS but still no success.for some reason it keeps on saying that it cannot calibrate and no signal found with the inputs and outputs of the soundcard.Iv'e tried everthing.If someone out there can call me and walk me through this process it would greatly appreciated.My name is B.J. and I live in Atlanta ,Ga it is now 7:12 pm EST.Feel free to call me at 770-675-6022.I'll be up for about two hours then it off to sleep .I get up early so if you can't reach me today Hit me up tomorrow after 3 pm EST.

Re: Installation

PostPosted: 28 Sep 2011, 09:43
by Blackbrook
Please post your computer's sepcs and a DVS 7 config report - thanks in advance!

Re: Installation

PostPosted: 28 Sep 2011, 12:55
by londonstyle
Hey I'm not a techie.I know what my computer's specs are but what is a DVS 7 configuration report?

Re: Installation

PostPosted: 28 Sep 2011, 13:17
by christiankoopmann
Hey,

could you then post for example: CPU (iCore 5 or 7, C2D), the size of the memory (e.g. 4GB RAM).

And to your config report. When you have installed DVS on the system and opened it you can creat via Options -> create Config-Report. After that a editor should open with some informations. These information please copy and post here at the forum.

regards
Christian

Re: Installation

PostPosted: 28 Sep 2011, 13:32
by londonstyle
I believe this should give you all the info you need.

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 2, GenuineIntel
MixVibes DVS version=7.400 DLL langage=US version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1- 2-

Vinyl Configuration
--------------------
Vinyl 1 not connected
Vinyl 2 not connected
Vinyl 3 not connected
Vinyl 4 not connected
Thats the report.

Here's cumputer info.
Western Digital Caviar SE16 WD2500KS 250 GB,7200RPM SATA 300 MB/s Hard Drive
OCZ 1GB(2x512 MB) 240 Pin DDR2 SDRAM DDR2 800(PC2 600) Unbuffered Dual Channel Kit System Memery Model OZ2P8001GK
Intel Pentium D 930 Presler 533 MHz FSB LGA 775 Dual Core.EM64T Processer Model BX80551PE2666FN

Re: Installation

PostPosted: 28 Sep 2011, 13:37
by Blackbrook
londonstyle wrote:Sound Configuration
--------------------
Nb Sound=1 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2
Managment Type ASIO
1- 2-


There is something wrong with your audio interface. It is recognized, but not installed correctly

Re: Installation

PostPosted: 28 Sep 2011, 13:38
by christiankoopmann
Hey,

Please unplug the soundcard and unisntall the driver. After that install this driver: [PC] [WIN XP, VISTA, SEVEN] U-MIX44 1.0.4

After installing plug the device into an free USB-port.

regards
Christian