Report the issues you noticed while using MixVibes.
by londonstyle on 27 Sep 2011, 01:31
Hey I just bought the Mixvibes DVS Ultimate package and I am having some problems setting it up.It installed OK but when I tried to configure it.on step 4 of the install wizard it could not locate mu U-MIX- 44 for inputs and output set up.I have Protools installed and I don't know if that's the reason it won't allow me to select another device,but in the window it reads(Not Connected)If someone can walk me through this process I would greatly apprecieate it. I'm kind of frustrated at this point. Thanks Guys, B.J.
-
londonstyle
-
- Posts: 6
- Joined: 27 Sep 2011, 01:17
by Blackbrook on 27 Sep 2011, 10:48
Please do a complete Reinstallation of your audio interface including cleaning the registry with tools like CCleaner and install the driver afterwards to a completely different location i.e. was it formerly installed to C:\program files\Mixvibes\ install it to C:\program files\Audio\Mixvibes
Cheers
Viele Grüße, Cheers, A plus, Steve Winner Mixvibes 10 years DJ contest 2009
-
Blackbrook
-
- Posts: 4417
- Joined: 25 Dec 2007, 14:33
by londonstyle on 28 Sep 2011, 01:13
I tried re-installing Mixvibes DVS but still no success.for some reason it keeps on saying that it cannot calibrate and no signal found with the inputs and outputs of the soundcard.Iv'e tried everthing.If someone out there can call me and walk me through this process it would greatly appreciated.My name is B.J. and I live in Atlanta ,Ga it is now 7:12 pm EST.Feel free to call me at 770-675-6022.I'll be up for about two hours then it off to sleep .I get up early so if you can't reach me today Hit me up tomorrow after 3 pm EST.
-
londonstyle
-
- Posts: 6
- Joined: 27 Sep 2011, 01:17
by Blackbrook on 28 Sep 2011, 09:43
Please post your computer's sepcs and a DVS 7 config report - thanks in advance!
Viele Grüße, Cheers, A plus, Steve Winner Mixvibes 10 years DJ contest 2009
-
Blackbrook
-
- Posts: 4417
- Joined: 25 Dec 2007, 14:33
by londonstyle on 28 Sep 2011, 12:55
Hey I'm not a techie.I know what my computer's specs are but what is a DVS 7 configuration report?
-
londonstyle
-
- Posts: 6
- Joined: 27 Sep 2011, 01:17
by christiankoopmann on 28 Sep 2011, 13:17
Hey,
could you then post for example: CPU (iCore 5 or 7, C2D), the size of the memory (e.g. 4GB RAM).
And to your config report. When you have installed DVS on the system and opened it you can creat via Options -> create Config-Report. After that a editor should open with some informations. These information please copy and post here at the forum.
regards Christian
  February 2012 Mixvibes DJ of the Month DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)MEMBER OF:  c00l People MV Society 
-

christiankoopmann


-
- Posts: 1823
- Joined: 19 Dec 2008, 16:44
- Location: Paderborn, Germany
by londonstyle on 28 Sep 2011, 13:32
I believe this should give you all the info you need.
OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 15 Model 6 Stepping 2, GenuineIntel MixVibes DVS version=7.400 DLL langage=US version=7.400
System Setting -------------------- Load in Ram Channel1= Yes Channel2= Yes Load memory time limit=13 Load time=normal Low gui priority=No Equalization bypass=No MultiInstance=No
General Setting -------------------- Nb Mixer Channels=2 Nb Samples=16 Windows Caption=No Theme=0 TAG V1=Yes TAG V2=Yes
Mix Setting -------------------- AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes Display Pitch=Yes Auto Match at load=No Bpm Range min=78 max=150 Loop in bar boundaries=Yes Security=No History=Yes Compressor=No Limiter=No
Sound Configuration -------------------- Nb Sound=1 Nb Mixer=0 Managment Type ASIO Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2 Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2 Managment Type ASIO 1- 2-
Vinyl Configuration -------------------- Vinyl 1 not connected Vinyl 2 not connected Vinyl 3 not connected Vinyl 4 not connected Thats the report.
Here's cumputer info. Western Digital Caviar SE16 WD2500KS 250 GB,7200RPM SATA 300 MB/s Hard Drive OCZ 1GB(2x512 MB) 240 Pin DDR2 SDRAM DDR2 800(PC2 600) Unbuffered Dual Channel Kit System Memery Model OZ2P8001GK Intel Pentium D 930 Presler 533 MHz FSB LGA 775 Dual Core.EM64T Processer Model BX80551PE2666FN
-
londonstyle
-
- Posts: 6
- Joined: 27 Sep 2011, 01:17
by Blackbrook on 28 Sep 2011, 13:37
londonstyle wrote:Sound Configuration -------------------- Nb Sound=1 Nb Mixer=0 Managment Type ASIO Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2 Latency=6 Driver sampling=44100 Nb Input=2 Nb Output=2 Managment Type ASIO 1- 2-
There is something wrong with your audio interface. It is recognized, but not installed correctly
Viele Grüße, Cheers, A plus, Steve Winner Mixvibes 10 years DJ contest 2009
-
Blackbrook
-
- Posts: 4417
- Joined: 25 Dec 2007, 14:33
by christiankoopmann on 28 Sep 2011, 13:38
Hey, Please unplug the soundcard and unisntall the driver. After that install this driver: [PC] [WIN XP, VISTA, SEVEN] U-MIX44 1.0.4After installing plug the device into an free USB-port. regards Christian
  February 2012 Mixvibes DJ of the Month DVS 7, Cross (DJ), U-Mix Remote App (iPad & iPhone App)MEMBER OF:  c00l People MV Society 
-

christiankoopmann


-
- Posts: 1823
- Joined: 19 Dec 2008, 16:44
- Location: Paderborn, Germany
Return to MixVibes 7 support
Users browsing this forum: No registered users and 9 guests
|
|
|