The evolution of my DJ Booth
1st generation
A ROG Laptop
UMCP-2
Originally I mapped the UMCP-2 to control 4 decks. However, that turned out to be a bit cumbersome. Once I started using 4 decks and all the Sampler pads I added the Quneo controllers.
2 Quneo controllers using 2 Crane stands. Used these to controll additional pads and video functions.
2 tiny generic monitor speakers.
Everything was set on top of a 12U rack that had a seconday Mixer and power management and storage drawers.
1st Booth.JPG
2nd generation
Got a 5 feet Odessey DJ table
A 6 feet 2 feet deep facade which I modified with LED lights
Got a DDJ-SX
A Samsumg 20 inch monitor in the center
A second computer to handle alternate video and also act as a backup system using the UMCP-2 and a DDJ-SP1.
IO Gear switch TX/RX to handle video source switching between Cross Video output and alternate video.
2nd LEDs Inside Center.JPG
2nd LEDs Inside Left.JPG
2nd LEDs Inside Right.JPG
2nd LEDs Left to right.JPG
2nd LEDs Outside Blue.JPG
2nd LEDs Outside Purple.JPG
3rd Generation
I was not quite happy with the LEDs, so I added extra backing for better reflection and high density LEDs.
2nd to 3rd LEDs Outside Cyan.JPG
2nd to 3rd LEDs Outside Blue.JPG
3rd LEDs Outside Blue.JPG
3rd LEDs Outside Purple.JPG
3rd LEDs Outside Red.JPG
4th generation
I sold the DDJ-SX and got a DDJ-SZ2.
Now I could switch between Serato, Cross, VDJ and Rekordbox.
4th DDJ SZ2 Cross L Serato R Full W New LEDs.JPG
4th DDJ SZ2 Cross L Serato R Full W New LEDs2.JPG
4th DDJ SZ2 Cross L Serato R Full.JPG
4th DDJ SZ2 Cross L Serato R.JPG
4th DDJ SZ2 Cross L Serato R2.JPG
4th DDJ SZ2 Cross R Serato L Center W New LEDs.JPG
4th DDJ SZ2 Serato R.JPG
4th LEDs Inside Center.JPG
4th LEDs Inside from left.JPG
4th LEDs Inside from right.JPG
5th generation
It was getting a little crowded on the tabletop. So I moved the 2 laptops to underneath the table.
Got 2 more monitors.
Got a switching bluetooth keyboard.
Mounted some hardware to hold microphone, iPhone or iPad for controlling lights in DMX and one Quneo controller which I hope to use to control Remix Video If I ever get that working correctly.
5th Center.JPG
5th Full Left View.JPG
5th Full Left w Serato.JPG
5th Full Right View.JPG
5th Full Right w Serato.JPG
5th Left Side.JPG
5th Left w Ku.JPG
5th Right Side.JPG
You do not have the required permissions to view the files attached to this post.
impressive figdj ,,
you got the issues with sound routing straightened out ,, 
you are a beast figdj,,
