by djsamrties on 20 May 2014, 01:34
hello everybody, sorry but im very busy, so i cant answer so far that i would.
I have test V11. Now, I can assign fx 1 or 2 with DECK A, B, C and D very well.
For the led, here is what happens :
If the selected fx assign is the DECK 1 (LED 1 ON and LED 2 OFF) and i select DECK 3, then LED 1 BLINK and LED 2 still OFF. But if the selected fx assign is the DECK 2 (LED 1 OFF and LED 2 ON) and i select DECK 3, then LED 1 BLINK but LED 2 still ON.
Same thing in the other way : if the selected fx assign is the DECK 2 (LED 1 OFF and LED 2 ON) and i select DECK 4, then LED 2 BLINK and LED 1 still OFF. But if the selected fx assign is the DECK 1 (LED 1 ON and LED 2 OFF) and i select DECK 3, then LED 2 BLINK but LED 1 still ON.
I continue to play with our mappings, and i notice a litlle problem. When i use SHIFT + JOG to go backward or forward, each time i push the jog to deplace myself, the indication time of the track switch between the elapsed time and the remaining time. Not very good things :s
Other observation. I think that i already say that but im not sure. If you use the quad decks mode with "3 players + 1 sampler C" and if you use DECK A and choose SAMPLER (6.12) you can staying on DECK A and use the samplers of the DECK C . But if you are on DECK B or D and choose SAMPLER (6.12), its impossible to use the samplers of DECK C. Can we do something for that ?
-
djsamrties
-
- Posts: 52
- Joined: 10 Mar 2014, 20:25
by FigDJ on 20 May 2014, 01:49
djsamrties wrote:hello everybody, sorry but im very busy, so i cant answer so far that i would.
I have test V11. Now, I can assign fx 1 or 2 with DECK A, B, C and D very well.
For the led, here is what happens :
If the selected fx assign is the DECK 1 (LED 1 ON and LED 2 OFF) and i select DECK 3, then LED 1 BLINK and LED 2 still OFF. But if the selected fx assign is the DECK 2 (LED 1 OFF and LED 2 ON) and i select DECK 3, then LED 1 BLINK but LED 2 still ON.
Same thing in the other way : if the selected fx assign is the DECK 2 (LED 1 OFF and LED 2 ON) and i select DECK 4, then LED 2 BLINK and LED 1 still OFF. But if the selected fx assign is the DECK 1 (LED 1 ON and LED 2 OFF) and i select DECK 3, then LED 2 BLINK but LED 1 still ON.
I continue to play with our mappings, and i notice a litlle problem. When i use SHIFT + JOG to go backward or forward, each time i push the jog to deplace myself, the indication time of the track switch between the elapsed time and the remaining time. Not very good things :s
Other observation. I think that i already say that but im not sure. If you use the quad decks mode with "3 players + 1 sampler C" and if you use DECK A and choose SAMPLER (6.12) you can staying on DECK A and use the samplers of the DECK C . But if you are on DECK B or D and choose SAMPLER (6.12), its impossible to use the samplers of DECK C. Can we do something for that ?
Thanks for responding so quickly. Very useful feedback. I will take a look at those section and get back to you soon.
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
by FigDJ on 20 May 2014, 03:02
DDJSR_C_31_RV12A.zip djsamrties wrote:I have test V11. Now, I can assign fx 1 or 2 with DECK A, B, C and D very well.
great, at least the assignment is correct. djsamrties wrote:For the led, here is what happens :
If the selected fx assign is the DECK 1 (LED 1 ON and LED 2 OFF) and i select DECK 3, then LED 1 BLINK and LED 2 still OFF. But if the selected fx assign is the DECK 2 (LED 1 OFF and LED 2 ON) and i select DECK 3, then LED 1 BLINK but LED 2 still ON.
Same thing in the other way : if the selected fx assign is the DECK 2 (LED 1 OFF and LED 2 ON) and i select DECK 4, then LED 2 BLINK and LED 1 still OFF. But if the selected fx assign is the DECK 1 (LED 1 ON and LED 2 OFF) and i select DECK 3, then LED 2 BLINK but LED 1 still ON.
I made some changes, I know is a lot of work but it is just trial and error at this point. See how it reacts now. djsamrties wrote:I continue to play with our mappings, and i notice a litlle problem. When i use SHIFT + JOG to go backward or forward, each time i push the jog to deplace myself, the indication time of the track switch between the elapsed time and the remaining time. Not very good things :s
Fixed. but just as a little bonus If you are on deck 1,2,3 or 4 And you are in HOTCUE MODE for the pads pressing HOTCUE a second time does not changes anything for the pad but changes your time display mode. You may have to switch the time display mode when you switch to HOTCUE. If you don't like it I can take it out as it is not a big deal. djsamrties wrote:Other observation. I think that i already say that but im not sure. If you use the quad decks mode with "3 players + 1 sampler C" and if you use DECK A and choose SAMPLER (6.12) you can staying on DECK A and use the samplers of the DECK C . But if you are on DECK B or D and choose SAMPLER (6.12), its impossible to use the samplers of DECK C. Can we do something for that ?
try now and let me know, I found couple of commands lingering from the DDJ-SX base code. They are now gone but I don't know if that is a fix because I couldn't find anything else bad in that section. Appreciate you input Mike and djsamrties and know this can become very tedious but please hang in there with the testing and we will get to our goal. Hopefully when we are done MIxvibes may decide to include the mapping as a standard map for the DDJ-SR and we would have bragging points as a joint effort.
You do not have the required permissions to view the files attached to this post.
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
by daniel clark on 20 May 2014, 03:07
FigDJ wrote: Hopefully when we are done MIxvibes may decide to include the mapping as a standard map for the DDJ-SR and we would have bragging points as a joint effort.
this team has bragging right no matter what ,, great effort
January 2012 Mixvibes DJ of the month MEMBER OF: C00l People MV Society 2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
-
daniel clark
-
- Posts: 6861
- Joined: 31 Oct 2008, 01:01
- Location: Charleston,S C
-
by FigDJ on 20 May 2014, 12:10
P_Jean wrote:FigDJ wrote:Hopefully when we are done MIxvibes may decide to include the mapping as a standard map for the DDJ-SR and we would have bragging points as a joint effort.
This isn't as simple ... LOL.
One can only hope, I am just trying to help people here. if it happens great, if not is OK too. Perhaps you have more insight since you used to be with Mixvibes. I know you are back there LOL. I don't get why.
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
by FigDJ on 20 May 2014, 12:11
RoJeC wrote:The costs ain't the making. It's the breaking...
Hey Ronald, I am sorry If I sound clueless, what do you mean?
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
by FigDJ on 20 May 2014, 17:59
RoJeC wrote:The making of software to work is the 'cheapest' part. Once it is supported the breaking (of anything whatsoever now or in future) cause the additional costs.
There a lot more costs between having a working piece of code and the end of life. (if I am right you are/were in this business as well and already know).
If it isn't to English, at least it is an expression used between me and my US developpers (other software..)
I know exactly what what your talking about now and you are absolutely right. Perhaps It could be made available in the user maps section of the downloads and add a disclaimer that frees MIxvibes from future support.
-
FigDJ
-
- Posts: 1355
- Joined: 22 Apr 2012, 17:03
- Location: Odenton, MD
Return to Mapping Midi
Users browsing this forum: No registered users and 118 guests
|
|
|