djdubc wrote:i have the LEDs to indicate what mode im in but they DO NOT light up when i press the button, i tried mapping the master/pfl to the output limiter to see if either LED would light up when i press the button...no success
and i tried to map the master meter to the master LEDs and i tried the pfl portion for one side of the pfl LEDs...all i get is a full master and pfl LEDs and they dont show the actual volume of whats in the program.....
I was looking at the manual and the following may or may not work because it seems like the mode button is a hybrid MIDI/hardware control
This part in the input section is setting up a logic modifier to a function that is not in Cross, in this case the LED mode button.
When on Shift logic one is on and so is master
Wehrn is off Shift logic one is off and so is PFL
Input
- Code: Select all
<mapping>
<events>
<MIDI type="Note" parameter="0x7" channel="0x1"/>
</events>
<controls>
<control alias="mod(ShiftLogic1)"/>
</controls>
<preset name="Toggler Button">
<parameters>
<parameter object="invert" key="on" value="off"/>
</parameters>
</preset>
</mapping>
Now for the LED. It may not work because there are no separate LED for the Master and PFL level Meters but if my assumption for the mode button is correct then this may work
Output
This is setting up Shift Logic one switch (the LED mode switch) to light the MAster LED when on and light the PFL LED when off.
- Code: Select all
<mapping>
<control alias="mod(ShiftLogic1)" value="true"/>
<MIDI type="Note" parameter="0x7" channel="0x1" value="127"/>
<MIDI type="Note" parameter="0xe" channel="0x1" value="0"/>
</mapping>
<mapping>
<control alias="mod(ShiftLogic1)" value="false"/>
<MIDI type="Note" parameter="0x7" channel="0x1" value="0"/>
<MIDI type="Note" parameter="0xe" channel="0x1" value="127"/>
</mapping>
This is setting your level LED for Master Left and Right for MAster Mode
Channel A on the left and channel B on the right for PFL mode
- Code: Select all
<mapping>
<control alias="fam(Mixer).MasterMeterLeft" value="%"/>
<MIDI type="CC" parameter="0x0f" channel="0x1" value="%"/>
</mapping>
<mapping>
<control alias="fam(Mixer).MasterMeterRight" value="%"/>
<MIDI type="CC" parameter="0x10" channel="0x1" value="%"/>
</mapping>
<mapping>
<control alias="fam(Mixer).ChannelAMeter" value="%"/>
<MIDI type="CC" parameter="0x0f" channel="0x1" value="%"/>
</mapping>
<mapping>
<control alias="fam(Mixer).ChannelBMeter" value="%"/>
<MIDI type="CC" parameter="0x10" channel="0x1" value="%"/>
</mapping>
Hope this helps