Page 1 of 2

using one DVS deck

PostPosted: 14 Dec 2014, 20:31
by Luke Cope
Ive been told that you can use mix vibes DVS on one deck. I have two turntables but the one from eBay only has one side of the stereo output working and i haven't got money to fix it. oh well i can still use that to mix normal vinyl with Cross.

However upon reading the manual i can't find a way to activate the DVS so one turntable controls either deck interchangeably. I haven't got the full version yet as i am waiting for the stuff to come in the post including sound card etc.

Summary:
How do i use just one turntable to control either deck in Cross and how do i swap which deck the turntable is acting on.

Re: using one DVS deck

PostPosted: 14 Dec 2014, 21:07
by RoJeC
Welcome.
For time code you need stereo signal.

In the central mixer section if you open the button with the deck character you can switch the input on the fly.

Also make sure to mute the inputs of your new soundcard in its driver. Else you end up with tc signal as sound...

So given your info you need the crippled tt with a splitter to go from one side signal to double mono as replacement for stereo as there's no pan function in Cross.

Enjoy

Re: using one DVS deck

PostPosted: 14 Dec 2014, 21:29
by Luke Cope
the turntable that stereo doesn't work on ill just hook up straight to the mixer and switch mixer to mono.

Re: using one DVS deck

PostPosted: 14 Dec 2014, 21:51
by RoJeC
Sounds like a plan.
Unless you want to record your mix. ...

Re: using one DVS deck

PostPosted: 14 Dec 2014, 21:55
by Luke Cope
RoJeC wrote:Sounds like a plan.
Unless you want to record your mix. ...

not to bothered about recording until i got a second fully working turntable tbf.

Re: using one DVS deck

PostPosted: 14 Dec 2014, 22:09
by daniel clark
:cool: just curious as to the software ver you are using now ,since your posting says full vers coming soon ,

and when you do get it dont forget to regerster it in the fourm :cool:

Re: using one DVS deck

PostPosted: 14 Dec 2014, 22:56
by Luke Cope
got the demo version of it to try it out with keyboard and my cheap controller before i bought the whole package. was impressed so i bought the control vinyl package and a turntables etc (one of which came early but has only one half the stereo working hence the post)

Re: using one DVS deck

PostPosted: 14 Dec 2014, 23:04
by daniel clark
:cool: you should be stright ,, getting the Cross version of the software ,, has ability to use DVS ,, ,by regerstering it in the fourm gives user rights to update the software .. so remember it when you get it :cool:

Re: using one DVS deck

PostPosted: 14 Dec 2014, 23:17
by Luke Cope
will do i don't have a disk drive on my macbook air though so is there a way to just download it off the website and enter key that comes with the software?

Re: using one DVS deck

PostPosted: 14 Dec 2014, 23:27
by daniel clark
:cool: yes the download section ,, is assessed by regerstering in the fourm :cool: