MIXVIBES Dj Community old forum

Hello there
I browsed the forum has tested several solutions mainte recovery but my concerns remain the same can you help me?

I explain:

1 - Calibration

I work with vinyl
when I am running the sound out so (until the nickel)
only worry when I go to calibrate:
1 plate: quality time code (0%) is too low
2 platinum: mixvibes can not work with your installation, redone the test

while the fate of the 2 decks!

2 - unwanted noise that is emitted

my plate 1 emits noise alone as if the cell was moving on vinyl (while're disconnected!)

3 - latency?

when I back my vinyl 2 (to return a little before low or other, he began to back slowly (none has the pace or should I go)

I like when my vinyl back 1 or 2 before starting my piece if I have the misfortune to arrive before the time code track, it makes me a break in my sounds of platinum currently running

4 - Display?
my display is not complete
I test all the dressing and the problem persists

or the time the song is supposed to show it is "cut" has half the horizontal



I'm sure this is a problem setting but I test everything I could find on the net / manual etc.

I was mixing a old I wanted to switch to digital and finally I have a lot of worries

here is my config

Config 2014/06/20 16:26

OS=Microsoft Windows XP Service Pack 3 build=2600 processor=PROCESSOR_IDENTIFIER=x86 Family 6 Model 14 Stepping 8, GenuineIntel
MixVibes DVS version=7.400 DLL langage=FR version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=No Equalization bypass=No
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=Yes Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=No Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=12 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-Périphérique audio USB 1 2-Périphérique audio USB 2
3-Périphérique audio USB 3 4-Périphérique audio USB 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:Périphérique audio USB 1-Périphérique audio USB 2
Mode=absolute
Riaa=No Preamp Left=39 db Preamp Right=37 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=Yes
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.489 Volume max right=0.489 Volume optimum=0.370
Speed Average(100ms)=0.999 Speed Average(1s)=1.000 Speed Average(3s)=1.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:Périphérique audio USB 3-Périphérique audio USB 4
Mode=relative time
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=87.933 Volume max left=0.002 Volume max right=0.002 Volume optimum=0.370
Speed Average(100ms)=1.001 Speed Average(1s)=1.000 Speed Average(3s)=1.001


Vinyl 3 not connected
Vinyl 4 not connected