MIXVIBES Dj Community old forum

Closed forum. You can only use it as a source of information about MixVibes software
https://forum.mixvibes.com/

U-Mix 44, detection vinyl issue.

https://forum.mixvibes.com/viewtopic.php?f=358&t=32253

Page 1 of 1

U-Mix 44, detection vinyl issue.

PostPosted: 06 Feb 2014, 13:47
by Bernie77
Hi everyone,

Obviously there are some big issues with the french support (no one could answer to my problem since more than 300 days...).

I have one Numark TT500, connected to my Vestax PMC 06.
I think I should launch it, but the vinyl keep stay unknown...

I tried almost everything, maybe my connectors aren't in the good place, or there is something with the U-mix44.
Drivers are ok, last version of it, etc. etc.

I know that the issue could be with the RIAA preamp.
But what should I do ?
The TT500 doesn't have a preamp RIAA button.

Here is my config report :

Config Report:
Config 2013/04/24 00:57

OS= Service Pack 1 build=7601 processor=PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 42 Stepping 7, GenuineIntel
MixVibes DVS version=7.400 DLL langage=FR version=7.400

System Setting
--------------------
Load in Ram Channel1= Yes Channel2= Yes
Load memory time limit=13 Load time=normal
Low gui priority=Yes Equalization bypass=Yes
MultiInstance=No

General Setting
--------------------
Nb Mixer Channels=2 Nb Samples=16
Windows Caption=No Theme=0
TAG V1=Yes TAG V2=Yes

Mix Setting
--------------------
AutoCue=Yes AutoGain=Yes AutoBpm at Load=Yes
Display Pitch=Yes Auto Match at load=No
Bpm Range min=78 max=150
Loop in bar boundaries=Yes Security=No History=Yes
Compressor=No Limiter=No

Sound Configuration
--------------------
Nb Sound=2 Nb Mixer=0
Managment Type ASIO
Device=MixvibesAsioUMix44 AsioVersion=0 DriverVersion=2
Latency=6 Driver sampling=44100 Nb Input=4 Nb Output=4
Managment Type ASIO
1-U-MIX44 Sound Device 1 2-U-MIX44 Sound Device 2
3-U-MIX44 Sound Device 3 4-U-MIX44 Sound Device 4

Vinyl Configuration
--------------------
Vinyl1 connected=vinyl version 2
Audio=ASIO source=0:U-MIX44 Sound Device 1-U-MIX44 Sound Device 2
Mode=absolute
Riaa=Yes Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl2 connected=vinyl version 2
Audio=ASIO source=2:U-MIX44 Sound Device 3-U-MIX44 Sound Device 4
Mode=absolute
Riaa=No Preamp Left=0 db Preamp Right=0 db Noise Filter=0 Hz
45T=No InverseLR=No PhaseInv=No
Decalage=0 ms Time limit=720000 ms
Silence seuil=-40.000 db SNR=40 db

Config Bypass Riaa=No Preamp=0 db Noise Filter=0 Hz Input Latency=0 ms

Vinyl Stats (turntable pitch set to 0 play at normal way)
Time code percent=0.500 Volume max left=0.000 Volume max right=0.000 Volume optimum=0.370
Speed Average(100ms)=0.000 Speed Average(1s)=0.000 Speed Average(3s)=0.000


Vinyl 3 not connected
Vinyl 4 not connected


If someone could be helpful, I will be highly grateful !

Thanks anyway

David

Re: U-Mix 44, detection vinyl issue.

PostPosted: 06 Feb 2014, 14:09
by daniel clark
:cool: :cool: since i have no experience with tc and yur config , only can say that hopefully you can get it resolved timely in this topic page ,, :cool:

Re: U-Mix 44, detection vinyl issue.

PostPosted: 14 Feb 2014, 16:47
by Bernie77
Thanks Daniel...

Hopefully, as you say ^^.
I'm not the kind of guy who despare ! :mrgreen:
All times are UTC + 1 hour [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/