Hi. I've been using Control Pro 2 for a while now, but annoying as you can't use headphones. So I purchased U-Mix 44, as was told this is what I needed. However, I can't get them to work for love nor money. I am using Cross DJ, have both CP2 and U-Mix 44 connected to a Toshiba laptop via USB. I've played around with the Audio settings in the preferences section, tried different cables with the InPut/OutPut sections on U-Mix 44, and nothing works. The best I get is being able to use Load B only, with no ability to hear the second track in Load A, and everything through the headphones sounds quiet.
Help! Apologies if in the wrong section. Couldn't see how to post in the Tech Sup bit.
well first off welcome to mixvibes fourm ,,,next will be to ask you to regerster your software licence key on the fourm,, user control panel/profile,, this is why you are not able to post in the tech help pages,, not familiar with the sc and set up ,,but by time you get the above done ,,some one will be able to help
controlpro 2 or control 2
January 2012 Mixvibes DJ of the month MEMBER OF: C00l People MV Society
2014 dell XPS8700 intel core i5 4400@3.10ghz 12 gigs DDR3 ram NVDIA GeForce GT635 Win 10 /64 bits OS Realteck 7.1 Home USB sound dogle Asus VE247H monitor Logitec G-15 ser 1 gaming keyboard U-Mix Control Pro 2
EDIT : you need to install the asio drivers if you want to have full access to all the ins/outs of the soundcard. You can download them here : [PC] [WIN XP, VISTA, SEVEN] U-MIX44 1.0.4
You do not have the required permissions to view the files attached to this post.
I don't understand how you have hooked your setup. - speakers are going at the back of the U-Mix44 on outputs 1&2 - headphones in the headphones sockets that is also the same sound from outputs 3&4 at the back, so you can also check there.
You should see the leds blinking on the soundcard. If they're blinking and still no sound then you need to crank your volumes into Windows.
- Right click on the speakers into the Windows traybar - Playback devices - Double click the U-Mix44 - Go to the Levels tab - Put speakers and headphones to 100% - Ok - Close all the windows
U-Mix Control Pro 2 connected to laptop via USB. U-Mix 44 also connected to laptop via USB. Headphones in headphone socket. Laptop connect to stereo via standard audio/speaker cables.
And that's it' I've tried connecting the speakers to the Output on U-Mix 44 and from there back to stereo but still nothing.
Support@MixVibes wrote:You should see the leds blinking on the soundcard. If they're blinking and still no sound then you need to crank your volumes into Windows.
- Right click on the speakers into the Windows traybar - Playback devices - Double click the U-Mix44 - Go to the Levels tab - Put speakers and headphones to 100% - Ok - Close all the windows
,,,next will be to ask you to regerster your software licence key on the fourm,, user control panel/profile,, this is why you are not able to post in the tech help pages,, not familiar with the sc and set up ,,but by time you get the above done ,,some one will be able to help 
