mapping out and dysfunction with modifiers

[tonip]

sorry B/D=7/9

[FigDJ]

vu-meter , I was doing the tests, with different channels , I tried ch =6 and ch = 8 but only works with ch = 8 and the switch to A.
Switch B and D ok .
the map of the player channels are reversed A/C=6/8 e B/D=5/7

is this you looking at the data file that I posted or testing?
If it is just testing then which version?

I know there is a language barrier here but I need you to be very specific, very detailed and to write complete sentences. This way I can understand what you are trying to say and help you with the map. Unless you at this point armed with the files that I provided feel that you can complete the map.

[FigDJ]

my understanding is

A=Channel 6
C= Channel 8
B= Channel 7
D= Channel 9

The other alternative is

A=Channel 7
C= Channel 9
B= Channel 6
D= Channel 8

Which is it? When you posted your original map you stated that channels were working correctly and that it was the LEDs what was wrong. So I only modified the LED sections.

Center section=Channel 8 and possibly 6

The data sheet that I provided is an old data sheet but it is the only thing I can find. In it the player channel are wrong but everything else seemed to be right.

I found it in DJTechTools website and there is a reference to an updated file but I can't find it. I don't have the hardware, otherwise I could map this very quickly. So it is just me guessing the code unless I get detailed step by step feedback on what is going on during testing.

[tonip]

Your work is still correct , I just wanted to point out that the map picture is wrong .
It seemed logical to think that vu-meter ok with ch = 6 and 8 , but with the switch A vu-meter is ok , switch on C vu-meter not working.

[tonip]

is correct:

A=Channel 6
C= Channel 8
B= Channel 7
D= Channel 9

[FigDJ]

Your work is still correct , I just wanted to point out that the map picture is wrong .
It seemed logical to think that vu-meter ok with ch = 6 and 8 , but with the switch A vu-meter is ok , switch on C vu-meter not working.

When you noticed this

what was the position of the Master/PFL switcht?

Edit

I forgot to ask. Which version were you using Mod2 or Mod3.

[tonip]

I used the mod 3. and master switch position

[FigDJ]

I used the mod 3. and master switch position

Ok try this test. It may not work but the results will give me a good indication of what is going on.

Use Mod3

1. Set the PFL/Master to PFL

2. Load Deck A and play

Do the lights come on?

If yes then

3. Load Deck C But do not play.

4. Switch over to Deck C, Then play

do the lights come on?

If yes we are OK. If no then

5. While still with Deck C selected press PFL for Deck C that side.

Do the lights come on?
If they do lower and raise the fader for deck see and tell me how they respond.

Now to test master.

Stop all players, Set Master/PFL switch to master

Play deck A, lower the master volume all the way doing.

What are the lights doing?

The answers to these questions will allow me to resolve the lights issue.

[tonip]

Ok try this test. It may not work but the results will give me a good indication of what is going on.

Use Mod3

1. Set the PFL/Master to PFL

2. Load Deck A and play

Do the lights come on?

If yes then

3. Load Deck C But do not play.

4. Switch over to Deck C, Then play

do the lights come on?

If yes we are OK.

Is ok (the LEDs come on , just one led flash with the music)

Now to test master.

Stop all players, Set Master/PFL switch to master

Play deck A, lower the master volume all the way doing.

What are the lights doing?

is ok, does not work if step A to C

[FigDJ]

Is ok (the LEDs come on , just one led flash with the music)

There were 2 questions in the step, i need to know the answer individually, beacuse what may appear to be working in fact may not be. 2 questions 2 answers.

is ok, does not work if step A to C

i need you to describe the behavior, do the light come up and down as you raise or lower the master? Don't worry about switching A to C or B to D during the MASTER test.